1 / 11
Prusa XL Tapo Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tapo Camera mount designed for the Prusa XL 20x20 mm aluminum extrusions (V-slot rails). Compatible with EnXLosure.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Tapo Camera Mount
A custom Tapo Camera mount designed for 20x20 mm aluminum extrusions (V-slot rails), originally designed for the Prusa XL but may of course be used on any similar rail.
Compatible Camera Models:
- C200 / C210 / C211 / C220
- TC70 / TC71
- Any other camera with a similar mount type (or use it for anything else that fits).
Features:
- Easy to print
- Easy to install
- Compatible with the EnXLosure, made by Voxel3D
Suggested Print Settings:
- Material: PETG
- Infill: 15% (Gyroid infill preferred)
- Printing Orientation: Four screw holes facing down
- Supports: Yes, required for the small shelves
Assembly Instructions:
- Attach the original Tapo mount to the printed mount using the original screws. (Drill the holes if needed for alternative screws. The holes in the model are 3 x 40 mm)
- Insert two 12 mm hex screws (10 mm may also work) into the mount holes. Add a shim for each screw if available.
- Attach drop-in nuts (printable drop-in nut) to the screws
- Secure the mount to the aluminum frame.
- Install the camera onto the mount.
- Done!
Let me know if you’d like further adjustments.