Counting matching models…
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
how to use Use a M4 screw with a flat underside of the head. how to print Print wings on the bottom. The only support will be in the middle. Put the mount horizontally on a mouse pad (for example), insert the screw or a cylinder in the…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
I designed this mount for my Eufy C220 camera, but it seems to fit the C210 and S350 camera as well. Might also work for different eufy camera's. You need 2 screws to attach it to a vertical surface, in my case the windowframe. But could…
Replacement mount for the E30 and C220 series Eufy cameras. When I moved, I lost a good amount of mounts since they were in a separate box. I made these to replace the mounts when double-sided 3M tapes wouldn't hold them. These are…
Hi there, I had misplaced my ceiling mount for the Eufy C220 Indoor Cam - so I simply created one in Tinkercad. Nothing special, no rocket science - but it does the job. Have fun
Remix of Sacy's C220 M3 drive caddy on Thingiverse. Cut 2mm off the entire length of the right side so it would fit into the drive bay of a Cisco UCS C220 M5 1U server. Also, cut a notch out of the back left side to make clear the…
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
A functional record player turntable made from 3D printed and 3D printer parts, With proper AT3600L needle and adjuestable tracking weight. Testing of my 3D printed turntable (V1-V3): https://youtu.be/MylsAJhz4OQ Features: No need for…
This is a lens hood designed to fit the 80mm lens for the Mamiya C220 and C330 family of twin-lens-reflex cameras. The dimensions are roughly worked out from online images of the original metal hood. The diameter of the clamping section…
Recommended settings: Material: ASA Layer height: 0,2mm Perimeters: 5 Infill: 15% Supports: NO Let me know how your print fits. :)
Ide o praktický a efektívny držiak navrhnutý špeciálne pre zariadenie TP-Link Deco M9 Plus, ktorý umožňuje jeho montáž na stenu alebo strop. Tento montážny držiak poskytuje stabilné a bezpečné umiestnenie vášho Deco M9 Plus jednotky, čím…
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
I needed a flat wall mount that could accommodate #8 wood screws for wall mounting.
Mercedes C220 Headlight Cap (2012- ?) Advantage (H7 bulbs) Print Settings Printer: da vinci 1.0 Pro 3 in 1 Rafts: No Supports: Yes Resolution: Medium Infill: 40% Category: Automotive
Tried Sacy's model for a Cisco UCS C220 M3 drive caddy but found two parts were not letting the drive fully slide in. Modified the design to remove the small bits in the back left and right that were in the way. Updated model now seats…
GoPro 9 10 11 Base Fusion C220 F212 15°/ 20°/25° Degres Tilt Not too tigh made on purpose. Print in TPU. It's really close to props for the Low profile version of F212 or C220. Post your makes!
TP-Link Tapo C220 camera mount nothing much to say works great.
Remix from fusion file. a bit stronger than the original. Category: R/C Vehicles
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
In apartment life, the go-to for hanging things on the wall is either to pray that your management staff doesn't notice the nail in the wall, or to use Command Strips. This camera mount lets you take the less destructive approach to…
Fan duct and matching fan grille for mounting a fan directly above a MKS GEN_L board. When used with a thin fan (8010), the design fits right inside the JGAurora A5 with enough headroom for the Y-axis gantry to pass over. Required parts:…
Ich verlor die Verriegelung des Schieberknaufs der Campingtoilette Thetford C220, somit war diese undicht. Als Ersatz kaufte ich mir eine neue Kassette und habe das Teil sofort ausgebaut und nachkonstruiert, jetzt kann ich auch die alte…
Rain/sun/weather shield for the Eufy C220 smart lock. Use double-sided adhesive tape to secure to door; I used this tape, cut to size/shape to fit: https://www.amazon.com/dp/B07TC16SZ7 I highly recommend print using ASA or at least PETG.
Slide on offset step-up ring to 58mm thread for Mamiya TLR (C330, C220). Tested on 80mm f/2.8 and 105mm f/3.5 lenses. There is no thread designed for 58mm side, but print surface provides enough friction for a snug fit. Print is done in 2…
Will probably fit other models too ! Replacement slide plate to keep the tank sealed if you lost the original one.
I wanted a basic mount for my drivers from Adafruit to keep them from shorting on random stuff on my desk. There wasn't one online. I made one. STEP file attached if you want to tweak it. Not affiliated with Adafruit. Basic mounts for the…
Compact setup for single 1U tray with both switch and media converter.
Tapo C200 C210 C220 mount for the tukkari enclosure. Technicaly I've used https://www.printables.com/model/441856-tp-link-tapo-cam-c225-or-c200-wall-mount-screw, but Printables doesn't allow this due to licence issues which I don't…
A relative brought me the broken handle bracket of his Thetford C220 cassette toilet tank (ref photos). This part is not available separately from Thetford who supply it only with a complete tank. I had only a few broken bits to work with…
Lens Cap for Silver 80mm 2.8 Could be that you have to scale it to compensate the shrink of the filament
4/26/2020 Update: Shrunk download significantly by removing my build libraries, that was dumb, you need to build it anyway. Also tuned down mA on TMC2209's to 790 to eliminate layer shifting issues I was having. Ignore the calibration…
Remix from fusion file without inferior part Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill: 100% Filament: Sainsmart TPU Black Category: R/C Vehicles
Nachdem der Eggbot nun läuft, musste ich feststellen, das der "Druck" ziemlich zittrig ist. Erste Vermutung war, das die Mechanik "schwingt". Bei näherer Untersuchung kamen nun die Motortreiber in betracht. Also Lösung gesucht und…
Print in PETG / 0,2mm Layer Height / 40% Infill
Printed using PLA with supports.
C220 plume Fusion action 3/4/5 tilt 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
GoPro 11 Mini Base Fusion C220 F212 (15°/ 20°/25° Degres Tilt). Not too tigh made on purpose. Print in TPU. Post your makes!
My friend had a door that was too thin for the default range and the lock shank was bottoming out preventing a good fit. This is a *very* simple model to shim the door by 5mm. The rectangular cutout was actually trying to use less…
I need integrate a TP-Link Omada OC220 on my 19" rack. The best option that I've found is the Mixmeister . I'd like optimize the space of my rack so I decided integrate it on the @Robert 19" rack tray.
Rear bottom bumper for Fusion C220 Frame.
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
For use with fan 4020 and TMC2209 Print Settings Rafts: No Supports: No Resolution: 0.16 Infill: 25 Filament: Bembird ABS Black Category: 3D Printer Parts
Quick & dirty version of the mount with hooks for a hanging version
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
Stepper Motor Driver TMC2208 V3.0, A4988, DRV8825 Control Extension Shield Board
I made this to replace the broken one on my string trimmer, this one works better
A wall or post bracket for the Tuya TLC2206 ultrasonic tank-level sensor (sold by EPTTECH, Wi-Fi or Zigbee). The sensor needs to look straight down at the water with nothing in the way: this holder keeps it flat in a ring, about 5 cm out…
A wall mount bracket for the Tapo C220 camera. Unlike fixed brackets, the top plate has mounting hole pairs every 45° — giving you 8 rotation positions to angle the camera and keep the cable naturally out of the way. Uses the camera's own…
3D model designed by Sedowynt using Autodesk Fusion (360) Personal License. I created this model for the people (like myself) who use old Hi-Fi towers as amplifiers. As amplifiers don't need disk changers or cassette players, and these…
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
A relative brought me the broken handle bracket of his Thetford C220 cassette toilet tank (ref photos). This part is not available separately from Thetford who supply it only with a complete tank. I had only a few broken bits to work with…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
Lens Cap for Silver 80mm 2.8 Could be that you have to scale it to compensate the shrink of the filament
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
