Mountbox for 3 in 1 Charging Station (Phone, Watch, Earbud Case) for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Custom Mountbox for the 3in1 Charging Station shown in the Picture (158x96mm) or anything else you want to use it for.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a Custom Mountbox / Shelf for the 3in1 Charger Station seen on the Picture (158x96), it has a hole in the back floor for a USB Cable to go through.
Of course you can also use it for whatever else you want.
I Printed it without bottom and top layers so that the Infill pattern is visible, saves Infill and looks cool.
You will need a Backplate with Hooks for the Mount, grab one from my collection of Universal Mounts here:
https://www.printables.com/model/1129157-skadis-universal-mount-collection-1-to-8-hooks-hor
My recommendation is a mount with at least 4 Hooks. Just Print one and glue it on the back of the Charger Station Mount.
My Settings:
Layer Height 0,2
Walls / Perimeter 5
Top and Bottom Layer 0
Sparse Infill 40%
Infill Pattern Honeycomb
Infill / Wall Overlap 30%
No Support
Enjoy