Hatchbox spool single layer drawers, lazy susan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are drawers that are for hatchbox spools specifically, and can be printed in vase mode. Due to that I use small…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Here are drawers that are for hatchbox spools specifically, and can be printed in vase mode. Due to that I use small screws to fix these. These are flush. Select an appropriate STL, as I included a recycle symbol at the bottom of the drawer.
At the bottom there is lazy susan that I made for marble run glass balls, inserted every 90 degrees into the thin round band.
The top of the lazy susanne contains a cross. So you need a couple of cross-coupler one-fifty to insert into that. For the second and third drawer interconnection, scale it down to 60-70% lengthwise, so that it is roughly the height of the spool.
As a reminder, always place heaviest parts at the bottom spool.
Print recommendations: use a wide nozzle for the drawers, print in vase mode. I used 0.8 mm nozzle with 0.55 layer height.
Category: Containers