Hatchbox spool single layer drawers, lazy susan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here are drawers that are for hatchbox spools specifically, and can be printed in vase mode. Due to that I use small…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Here are drawers that are for hatchbox spools specifically, and can be printed in vase mode. Due to that I use small screws to fix these. These are flush. Select an appropriate STL, as I included a recycle symbol at the bottom of the drawer.
At the bottom there is lazy susan that I made for marble run glass balls, inserted every 90 degrees into the thin round band.
The top of the lazy susanne contains a cross. So you need a couple of cross-coupler one-fifty to insert into that. For the second and third drawer interconnection, scale it down to 60-70% lengthwise, so that it is roughly the height of the spool.
As a reminder, always place heaviest parts at the bottom spool.
Print recommendations: use a wide nozzle for the drawers, print in vase mode. I used 0.8 mm nozzle with 0.55 layer height.
Category: Containers