(Cold Shoe) camera mount for monitor stand/arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
uses cold shoe to mount camera and attaches to a round monitor arm/stand by sliding onto it.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this was made to replace my camera tripod by sliding onto my monitor stand and mounting the camera at the top with a cold shoe.
This is split into three pieces to make it easier to print.
Dimensions
My monitor stand has a 35.5mm diameter and this fits snugly.
it raises the camera up roughly 160mm
Notes:
the dove tail joints aren't the tightest but once super glued together they are rock solid.
Alternatively a small piece of paper can be used as a shim if needed.
It printed well with my support settings but the supports for the cold shoe are annoying to get out and will require a knife or some sort tool. I just used a utility knife.
