(Cold Shoe) camera mount for monitor stand/arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
uses cold shoe to mount camera and attaches to a round monitor arm/stand by sliding onto it.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this was made to replace my camera tripod by sliding onto my monitor stand and mounting the camera at the top with a cold shoe.
This is split into three pieces to make it easier to print.
Dimensions
My monitor stand has a 35.5mm diameter and this fits snugly.
it raises the camera up roughly 160mm
Notes:
the dove tail joints aren't the tightest but once super glued together they are rock solid.
Alternatively a small piece of paper can be used as a shim if needed.
It printed well with my support settings but the supports for the cold shoe are annoying to get out and will require a knife or some sort tool. I just used a utility knife.
