1 / 8
Lock Pick 9 in 1 Multitool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Choose 9 attachments to print and assemble this multitool.
Print Lower, Upper, 2 Nuts, and 9 spacers.
The nut is hard to screw on with hand, use a tool if possible.
- Print threaded parts in high-quality settings. (i used 0.16mm layer height)
- Print with part solid. About 5 walls or do 100% infill
- The spacer is small, ARACHNE wall generator worked for this part
- Use stiffer materials such as PLA, PLA-CF.
- ABS or PETG are more flexible, which is bad for printed lock picks.
Assembly Instruction:
- Place a 1mm thick tool on one end of the first rod
- Place a spacer (1mm thick too) on the end of the second rod
- Repeat until 9 tools and 9 spacers are used up
- Place Upper part on and screw nut if needed (The lid can be press fitted without nut)
Slim 6 in 1 lock pick:
https://www.printables.com/model/1138102-lock-picks-slim-6-in-1
Check out OTF Pick, Lock Pick Tensioners, Rake, and Notch Decoder too:
https://www.printables.com/model/1112320-otf-lock-pick
https://www.printables.com/model/1103439-lock-pick-tensioner