Skadis Jetflame Torch Holder 20mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Skadis holder for those big jetflame blow torch lighters with a front diameter of about 20mm.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 117
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
This is my third try to design a jetflame blow torch lighter holder for Ikea Skadis (older versions: here and here). Now I'm happy and won't bother anyone with new versions.
For lighters with a front diameter of about 20mm.
A bit tricky to print.
Support needed! Tree support works fine.
Best printed with 4 walls and as oriented in the stl file (pegs upside).
Use a brim if your bed adhesion isn't the best.
The pegs need to be printed very slow for better stability!
I finally ended up using ABS-GF and modifiers to print the pegs with 10mm/s..