Power Receptacle box and switch box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocate your power receptacle and switch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a safe receptacle box for the house input power and main power switch that was relatively close to the meanwell power supply (PSU) on my Ender 3 V2 when I expanded the printer with the enderextender pro kit (and needed to move the PSU).
The power receptable opening is approximately 31 mm x 27 mm. (I had to trim about a ½ mm to make mine fit. Two holes spaced 35mm to mount the switch using original screws.
The switch receptacle opening is approximately 11mm x 30mm.
Shell thickness is 1mm which is perfect for my switch that mounts with tabs.
I mounted this to the back of a 4040 extrusion that also has a 2020 stiffener. Through bolted to tapped M5 holes in the 4040. I used 65mm m5 socket head cap screws.