Power Receptacle box and switch box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Relocate your power receptacle and switch
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I needed a safe receptacle box for the house input power and main power switch that was relatively close to the meanwell power supply (PSU) on my Ender 3 V2 when I expanded the printer with the enderextender pro kit (and needed to move the PSU).
The power receptable opening is approximately 31 mm x 27 mm. (I had to trim about a ½ mm to make mine fit. Two holes spaced 35mm to mount the switch using original screws.
The switch receptacle opening is approximately 11mm x 30mm.
Shell thickness is 1mm which is perfect for my switch that mounts with tabs.
I mounted this to the back of a 4040 extrusion that also has a 2020 stiffener. Through bolted to tapped M5 holes in the 4040. I used 65mm m5 socket head cap screws.