Counting matching models…
This model remixes the right rear riser from the original “ JC-Creality K1 Lid Riser ” by Joe Cooper which must be printed for this to be useful. The rear mounted filament spool holder on the Creality K1 is inconvenient if not downright…
I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…
Note: You have to press it with some force down on the rail in order to fit. I had to use a wrench. Screen ribbon cable was too short for me. Had to remove cablestrains in order to fit. Orderer a new cable on AliExpress. Category: 3D…
No print support needed! I know this is not the first model for this purpose, this one uses heat inserts (M3, 4mm long, 4.6mm or 5mm OD) Also added a bunch of additional mounting point (meant to use heat inserts M3, 4mm long, 4.6mm or 5mm…
There are three files. “ PS side bracket with 40x40 mount.stl ” adds a 40x40 extrusion endcap with a hole to the original Side bracket design to screw the bracket to the existing threaded holes in the lower frame extrusion. “ newPScase…
UPDATE 1: I was asked if i could do a model without the switch. It is included now. I wanted to relocate the power switch to the front so I made a screen cover that has a lid with a place for a switch. I also added a spot to relocate the…
New Year new MMU! New mounting brackets for MMU2S unit to allow relocating the CCA under the main unit such that the LED's are visible if the printer is set higher. Uses same hardware as the original. For a fancier F# display see:…
this mod relacates the y-endstop microswitch inside the cable-cover above the b-motor on a voron 2.4 i used the original design and stiffen it a little bit to ad room to mount a microswitch . it also containes the files for a block that…
This is a drawer handle that can be relocated to the top (shallow or deep back) or the side of the drawer (no back). It can be printed fast (0.2 mm) with no supports. Print facing up as on the photo. Two sizes are available (7 and 14 cm)…
Update August 8, 2026: adding adapter for spool 2 & 3. In case the spool in 2 and 3 touch the floor, it's recommended to use some kind of feets to increase the ground clearance of the CC. The HULA feet is a good option. Spool 1 & 4…
I designed these corner belt covers for the Ender 5 Plus to work just like those designed by D_Jespersen's, and hopefully match the style, but function as covers for the ends of extrusion if you have relocated your crossbar like me. Since…
Because I have sleeping bed and foldable table in car, the original inner door handle was inaccessible and closing was problematic. So I created this handle which can be used also as handle for tailgate opening or closing. Installation is…
This model is a bracket for relocating the screen of Creality's Ender 3 V3 SE printer. No additional sanding is required. The original screws can be used and the holes are perfectly aligned. I made this model because I thought that the…
The Centauri Carbon has been a great machine for me, but I was not content with the initial filament feed path. I prefer to to print from a filament dryer box, but while doing so, the filament would bind due to the runout sensor being…
EDIT: added a reverse mount option to let the cable hang underneath the sensor, rather than needing to route it on top of the sensor. This piece is to replace the back-right corner of Unibody Riser, in order to mount the Runout Sensor…
Relocated the Y End Stop to the back left for better cable management. I use Klipper so made the stepper_y - position_endstop to 316 (since I lost some dimensions with the AfterBurner mod). Use 2 m3 x 6mm bolts to install the end stop and…
Just a simple 40rail model to relocate the Neptune 3 display outside enclosure using original hardware
This is a simple case to relocate and replace the original LCD mount. V2 is a little too tall to go under the bed on my machine, but V3 is shorter, but slightly harder to print depending on your machine. For Assembly, I mounted my LCD…
The USB slot on the MK4 seems really tight and it sticks out just nervous that it may get broke. I bought this extension from amazon and designed a mount for it. it attaches with the frame with 2 M3x10 counter sunk screws with t nuts. i…
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
This is just a remix to remove the hinge for the lid as i dont want the lid on mine. This one has the wifi antenna and power switch I used these crimps for the NEW switch poles the other two ends should just use a straight spade…
When I installed the MGN12H Linear Rail mod from @thisiskeithb, I found I had lost some Y-axis travel due to the bed jamming into the bearings on the front end of the Y-axis. Between that and my spaced forward Phaetus Dragonfly hotend, I…
X endstop mount for stealthchanger to relocate x endstop to the back modded to relocate x endstop to the back - used in combination to voron rear umbelical added x endstop mount to relocate x-endstop for stealthchanger
Note: This mod involves mains power wiring and opening the PSU, and will likely require a licensed electrician to do so legally in your country. It is your responsibility to check your local requirements, and undertake this project…
This solution is 100% reversible and non destructive. Use it to hold the male end of the 90' elbow into the intercooler outlet. Requires a couple long ~35mm M3 bolts and nylock hardware. I printed with an .8mm nozzle 2mm minimum wall…
FINDA cable guide for “MMU2S Relocated CCA” For all the upgrades see: https://www.printables.com/model/110448-mmu2s-relocated-cca
Designed for and tested on an Ender 3 Pro - it may also fit other Creality printers that use the same LCD board. The tiny slot in the back is for the LCD ribbon-cable to pass through. Just split the ribbon down the middle or fold it in ½…
I needed more shelf space to put three printers, but the screen made the printer take up too much space width wise. So, I designed this mount to move the screen on top of the printer and right next to the build plate. I made sure the hot…
I think the original location of the Ender 3 power supply is better and safer than the V2 after I found myself reaching through the machine to turn it on or off. It prints on end with no supports needed.
I made a Remix to better fit my needs, this is what has been changed: - Added hole for IR LED (I glued a piece of clear plastic on the inside). - Added compartment for the Battery. You can use a piece of foam to hold the Battery down,…
This is a simple bracket that adds a mounting point for the mapping switch behind the dashboard of 2024+ KTM Group Enduro Motorcycles (Models that use the 2 bolts instead of the rubber straps on the fork legs). I needed the extra space…
Designed to be used with LM2596 LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Printed low-quality 0.28mm Duramic 3D PLA+
Like the title says this plate moves the ESC / receiver box forward to make room for the installation of the 540XL motor.
Relocated my z chain and didn't like the cutout at the center on my bedfan cover.
This remixed fan shroud adds mounting holes on the left side of the shroud for mounting a BL Touch closer to the print head. The mounting holes are spaced to use the Ender 3 MAX bracket supplied with the BL Touch. There are three holes to…
Remix / recreation of https://www.thingiverse.com/thing:4852456 , that allows you to remove the top front bar of the X5SA (pro and non pro) and reroute the belts so that they don't interfere with your view of the printhead/printjob. While…
For shorter folks keeps the seat belt strap off your neck. Fusion360, step and stl included. I used #6 tapered screws. It does not allow belt retraction as well as factory, but it works pretty good. Nothing special in printing required. I…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…
This print raises the display a few millimeters to allow clearance for a custom front door. It also tilts the display back for easier reading and operation if you are tall or the printer is on a low table. Printing instructions This part…
ender 3 top brace extruder relocated to reduce weight on x axis. slides on
My Mojave 4s center driveshaft bearing wouldn't fit in the stock location as the TP 4050 that I've installed is slightly too large to fit the bearing in the normal spot. To fix this, I made a custom mount that securely holds the…
This is a set of parts I designed to relocate the stock spool holders for the Snapmaker Artisan, They allow the spools to be located inside the enclosure without the need for PTFE tubes which can cause drag on some filaments. The bar and…
If you have Genright fenders you know the marker lights are tucked way up inside the fenders and are almost not visible from the front. This simple plate relocates the LEDs down by about 20mm which makes as huge difference for front…
Modeled a little LED Guide for the modified MMU mount. Added and slightly modified the settings from CNC Kitchen to print it as clear as possible, but still keep it a little bit diffused. The 3mf file has these settings in it. (…
install this when not using the filament sensor on ender 3 pro
See video for help.
This is just a small modification of WellFan-Part2.stl. Go grab Part 1 and 3 from here ! I have my printer in a tight spot and the recessed hole that pacman42 did would bring my printer dangerously close to the front edge of my desk, so I…
Remixed Right bracket for use with https://www.printables.com/model/110448-mmu2s-relocated-cca while also using https://www.printables.com/model/19211-mmu2s-building-a-better-base
I didn't find anything that fit what I wanted for my new heated enclosure that would safely and effectively organize and house my electronics. I run Klipper and have a Meanwell PSU and wanted everything to be kept in the same part. This…
stock bracket interfered with the part cooling duct used two m3x10 bolts, stock may work, i didn't try switch mounts are threaded, re use stock hardware here print with the long flat edge touching buildplate supports touching buildplate…
This is a model to relocate the Z-levelin sensor from its original location, in order to allow somewhat adjustable Z-level, it gets moved to the 12mm steel rod ( the one the bed moves up and down on ) and is held in place with any m3…
! Voron 2 only ! not designed to use with trident and it appears to be interfering with the Z motor. 250-350mm voron 2 support. not designed for trident or micron or others. for relocate 5v power supply for make some room and it also can…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…
Who is this bracket for? For people who want to position their display even lower and for that 0.01% of people who have installed an 80mm hotend cooling fan .
Clamp rests between motor and EBB36 mounting plate, mounted on brass tube and an extra long M3 Heat inserts are M3 shorts and the clamp fits with M3x6mm/8mm
As any owner of a Creality CR series printer will be happy to tell you, the filament sensor is located so closely to the extruder that if it does detect a break or the filament runs out, it's very hard to recover from it because there's…
For shorter folks keeps the seat belt strap off your neck. Fusion360, step and stl included. I used #6 tapered screws. It does not allow belt retraction as well as factory, but it works pretty good. Nothing special in printing required. I…
Uses existing t-nuts to secure base to 4020 rail. Two additional M5 x 12mm socket head bolts will be required. Existing M5 cap head bolts may be used to self-tap bracket holes. An IDC 10 pin extension cable and ground cable extension will…
For shorter folks keeps the seat belt strap off your neck. Fusion360, step and stl included. I used #6 tapered screws. It does not allow belt retraction as well as factory, but it works pretty good. Nothing special in printing required. I…
I purchased a RackChoice M-ATX/Mini-ITX 2U Rackmount 12 disk chassis and I am not the only one with the issue. The standoff was drilled about 2.5 mm off so I made simple relocator use a little super glue to hold it and should be easy to…
I installed a 2-inch body lift from 4x4Parts on my 1st gen Xterra, which left the power steering reservoir no longer able to reach the factory bracket. The common fix is to zip tie it to the bracket. But I didn't really like that solution…
I have a 1974 Honda CB550 - I don't like the ignition switch located at the side under the gas tank. I prefer having the ignition switch between the speedo and tach like later years. Unfortunately, it is a major parts swap to go to the…
A simple mount to move the stock beta dash to the right, so it isn't obscured by my GPS. It may work with KTMs too if their mount holes are 80mm apart and have the same wire pigtail position. Chase the printed M6 threads with a tap.…
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
Uses existing t-nuts to secure base to 4020 rail. Two additional M5 x 12mm socket head bolts will be required. Existing M5 cap head bolts may be used to self-tap bracket holes. An IDC 10 pin extension cable and ground cable extension will…
This print raises the display a few millimeters to allow clearance for a custom front door. It also tilts the display back for easier reading and operation if you are tall or the printer is on a low table. Printing instructions This part…
ender 3 top brace extruder relocated to reduce weight on x axis. slides on
2025 K1 Max PTFE tube bracket that clips onto the back of the printer and moves the tube mount around to the side
Brings the crossbeam in front of the printer to get clearance for the nozzle brush: https://www.printables.com/model/1565015-nozzle-brush-for-ender-5-pro
Wanted to use v-slot covers and cable chains with PSU relocate. Remixed the left rear mount with a cable chain mount model by spooky_skookum on Thingiverse. Split model into two pieces that fit together to make printing a little less…
