Screen Guard Switch Relocate Plus WiFi - No Lid Remix Elegoo Centauri Carbon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to remove lid hinge.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 70
- Makes
- 0
- Views
- 651
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is just a remix to remove the hinge for the lid as i dont want the lid on mine.
This one has the wifi antenna and power switch
I used these crimps for the NEW switch poles the other two ends should just use a straight spade connector. The wiring you should use is 18 gauge wire to do this project.
The switch I used was https://www.amazon.com/dp/B07MV56LKS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The antenna I used was https://www.amazon.com/dp/B076SGTMFS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The amazon link for the antenna no longer sells the antenna / wire combo, you can buy the female antenna via original link and here is a link for the wire if you decide to go this route https://www.amazon.com/dp/B098QGFHSF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
All credit to Uncle Juan
Go to original post for instructions
Not responsible for any work that you may perform on your printer. All modifications are your responsibility. Take your time doing this.