CR Series Filament Out Detector Relocater
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
relocates filament out sensor so you can get your hand in there to pull out the filament
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As any owner of a Creality CR series printer will be happy to tell you, the filament sensor is located so closely to the extruder that if it does detect a break or the filament runs out, it's very hard to recover from it because there's no room to get your fingers in to pull out the filament.
So, I made this. It relocates the sensor ~80mm farther away from the extruder so it's easier to remove the broken filament (or re-fill the filament)
It's a bit "flexy" so that it doesn't force the filament to bend sharply to enter the sensor, hopefully, reducing the chance of it breaking