CR Series Filament Out Detector Relocater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
relocates filament out sensor so you can get your hand in there to pull out the filament
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As any owner of a Creality CR series printer will be happy to tell you, the filament sensor is located so closely to the extruder that if it does detect a break or the filament runs out, it's very hard to recover from it because there's no room to get your fingers in to pull out the filament.
So, I made this. It relocates the sensor ~80mm farther away from the extruder so it's easier to remove the broken filament (or re-fill the filament)
It's a bit "flexy" so that it doesn't force the filament to bend sharply to enter the sensor, hopefully, reducing the chance of it breaking