1 / 5
Filament sensor relocater + Y-Splitter in once for Anycubic Kobra S1 — image 1
1 / 5

Filament sensor relocater + Y-Splitter in once for Anycubic Kobra S1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I found the relocator of SPEKERDUDE and the Y-splitter of InterlinkKnight and put them together

Rating
5 / 5
Likes
93
Downloads
745
Makes
4
Views
3,241
Reviews
3

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1.

You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could not find such screws, search them in a screw terminal connector.

I printed it with PETG and a layer hight of 0,2 mm.

Just a little note:

I printed without supports for the tubes, as no support structure interfaces are printed there anyway. It might help if you try to scrape away the unevenness inside the Y-piece with the tip of a very sturdy (but slightly flexible) metal rod. Of course, I printed supports under the ends of the Y-piece.

I used the M2.5x4 mm screws for the upper piece and I used the original screws for the sensor.

Thanks to SPEKERDUDE and InterlinkKnight.

Have fun with it.
Markus