Pico MMU holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for pico MMU by LH
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 3094
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Pico MMU is an open source project by LH, it allows you to connect the MMU system to almost any FDM printer equipped with Klipper software, the entire project, all models, and assembly instructions can be found at this link:
https://github.com/lhndo/LH-Stinger/wiki/Pico-MMU
My model is a holder for the MMU system, because there is no way to attach it to something, I designed this holder, it has four mounting holes with a diameter of 3.5 mm (the head of the screw is max 7 mm), the spacing of the holes is 42 mm X 28 mm
screw holes are intentionally tight so that the entire MMU fits better in the housing and dont moving, however, the holder is intended for horizontal surfaces and I am not responsible for any damage caused by screwing it to walls or ceilings.
the project includes the use of a cover designed by @nick1 which you can download from him:
https://www.printables.com/model/1083174-mmu-multi-material-upgrade