Small Machine Vise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed vise with stop gauge for repeatable workpiece holding. Part of a bigger Dremel conventional mill project.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
A small machine vise with interrupted thread for quick move of the jaw.
It has stop gauge using an M4 threaded rod through the 4.5mm hole, adjusted either by the 2 M4 nuts holding the threaded rod or by loosening the M10 printed grub screws.
Recommended maximum opening is at 85 mm.
Recommended material is PLA+
Recommended layer height is 0.2mm with 4 solid bottom and top layers.
Recommended infill is cubic at 20% or more
The part vise_grub_screw.stl needs to be printed 3 times
An additional threaded rod or bolt M4x40mm and 2pcs M4 nuts required
Support is needed on the part vise_jaw.stl
All parts are correctly oriented for printing