Small Machine Vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed vise with stop gauge for repeatable workpiece holding. Part of a bigger Dremel conventional mill project.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 37
- Makes
- 0
- Views
- 251
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
A small machine vise with interrupted thread for quick move of the jaw.
It has stop gauge using an M4 threaded rod through the 4.5mm hole, adjusted either by the 2 M4 nuts holding the threaded rod or by loosening the M10 printed grub screws.
Recommended maximum opening is at 85 mm.
Recommended material is PLA+
Recommended layer height is 0.2mm with 4 solid bottom and top layers.
Recommended infill is cubic at 20% or more
The part vise_grub_screw.stl needs to be printed 3 times
An additional threaded rod or bolt M4x40mm and 2pcs M4 nuts required
Support is needed on the part vise_jaw.stl
All parts are correctly oriented for printing