1 / 1
Traxxas X-Maxx Rear Bumper Support Towers (replaces #7734) — zdjęcie 1

Traxxas X-Maxx Rear Bumper Support Towers (replaces #7734)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for Traxxas part #7734

Ocena
0 / 5
Polubienia
15
Pobrania
148
Wydruki
0
Wyświetlenia
620
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Replaces the support beams from Traxxas part # 7734. 

Got my first X-Maxx and this either came pre-broken during shipping or on the first run.  Print this part in TPU.  I've used  both 98A hardness and 95A hardness and they both worked.  The 98A seems like it will add better support to the other bumper components except it doesn't bounce back to its original shape as well.

This should be a fairly easy print.  Supports are required but are very minimal.  They are pre-painted in the .3MF file.  The middle support is optional.  Split to parts and it can be resized or removed.  

 

It is compatible with or without the wheelie bar installed.

This model will work with the stock bumper or also with the X-MAXX Rear Bumper Light Bar by @AaronKelley_451572

You will need to print the bumper out of something other than TPU.  TPU is not strong enough to hold onto screw threads and they will pull out.  You could probably drill the mounting holes all the way through and countersink the screw head behind the lightbar.  Then use a nut on the backside.

 

Tagi