Traxxas X-Maxx Rear Bumper Support Towers (replaces #7734)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for Traxxas part #7734
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 149
- Makes
- 0
- Views
- 631
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Replaces the support beams from Traxxas part # 7734.
Got my first X-Maxx and this either came pre-broken during shipping or on the first run. Print this part in TPU. I've used both 98A hardness and 95A hardness and they both worked. The 98A seems like it will add better support to the other bumper components except it doesn't bounce back to its original shape as well.
This should be a fairly easy print. Supports are required but are very minimal. They are pre-painted in the .3MF file. The middle support is optional. Split to parts and it can be resized or removed.
It is compatible with or without the wheelie bar installed.
This model will work with the stock bumper or also with the X-MAXX Rear Bumper Light Bar by @AaronKelley_451572
You will need to print the bumper out of something other than TPU. TPU is not strong enough to hold onto screw threads and they will pull out. You could probably drill the mounting holes all the way through and countersink the screw head behind the lightbar. Then use a nut on the backside.