Counting matching models…
Masse bumper de marque john deere pour attache type siku. Largeur totale : 75 mm Epaisseur max de l'attache : +- 3 mm Je vous conseil de l'imprimer en 0.1 mm à la verticale. (comme photo sur le tracteur)
14/6/2025 Reuploaded correct file for bumper part 1 (Another design I forgot about) Prints in two parts, plastic upper and a TPU bottom. Knurling for grippers. Parts connect to each other with a dovetail and a detent, may need a dab of…
A modified version of Sanderpuh's arm protector without the ridge for cob lights. Print in TPU
Added 4x 3mm LEDs to the rear bumper, the LEDs need to be mounted with their holders. The red wire with the resistor needs to be desoldered, turn the wire around and solder the other end to the LED.
This simple 3D print acts as a bumper around the Adafruit MacroPad's base PCB (the one with the Golden Record artwork on it). Print Settings Printer: Generic Rafts: No Supports: No Resolution: 200 Infill: 15% Filament: Any Flex Any…
TBS Source One v5 Bumper made out of TPU
This bumper will replace the rubber stop on the firewall of a Peterbilt 389. Printed in TPU with 4 walls and 40% infill. Feels and functions just like originals
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
I recently bought an airsoft grenade from Begadi and even though the shells are relatively cheap to replace I wanted to protect them a little. The caps are designed to friction fit - which they do really well. If your printer is not as…
I would recommend ABS or ASA, as the part is exposed to direct sunlight and therefore heat. layerheight: 0.2mm infill: 20% (gyroid) wall loops: 4 top shell layers: 5 (cause we need a little bit extra material for sanding)
This is bumper u made for a fimonda carbon frame (it can be used on other brands). It is 72mm wide. I would recommend printing it in PETG or something stronger then PLA. Category: Vehicles
Bumper arrière pour frame Parallax Valkyrie support pour antenne linéaire intégré au model insert arrière O3 intégré
I'm continuing my effort to transfer the 3Dsets.com model 14 “Long Max” into an expedition vehicle. As a long-time player of Spintires/Mudrunner/Snowrunner games, i know pretty well, that there is no off-roading without a winch, so I…
A faux led bar for the ARB style bumper by @pruzkumakkoubahadr. I suggest using -.025 Horizontal expansion on both parts for a snug fit without sanding. Enjoy and post your makes!
The Soundboks Gen 2 speaker has hard aluminum corner bumpers, unlike the rubber corner bumpers on the Gen 3 and Gen 4 speakers. These hard bumpers are prone to scratch and dent. This model is designed to add a bit of squishy TPU…
I printed this in ABS for durability in the summer heat at 100% infill. This part goes to the right keel of the paddleboard. Flip it on the slicer to get the one for the left keel.
Made for two spare tires. just pops into the holes. Easy to print. ENJOY! MRC.
A modified version of Sanderpuh's arm protector without the ridge for cob lights. Print in TPU
Print instruction nozzle: 0.4 mm layer height: 0.2 mm filament: PETG The detail of template can be found from the creator's post: https://x.com/tyarinko/status/1885204408432288127
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
Flexible front bumper for an Xray X12. The front of the bumper lines up nicely with the edge of the body. Printing with 100% infill with ABS is recommended.
ZC31S Suzuki Swift Sport Bumper Hole Filler This custom bumper hole filler is designed for the ZC31S Suzuki Swift Sport, specifically for vehicles running a single-exit exhaust in place of the original dual-exit setup. The model is based…
NEW V2 POSTED: This is a bmw e36 intake that resembles the Dinan intake. I wanted to make my own and didn't want to pay the $400 price tag. Printed In black ABS Printer: creality k1 (the one pictured that is held is the final prototype)…
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
FR Des pares chocs avants et arrières n'étaient selon moi pas suffisants, donc j'ai conçu des pares chocs latéraux, l'assemblage est simple, vous n'avez besoin de rien EN Some side bumpers since front and rear bumpers weren't enough in my…
Does your Arrma Gorgon have a habit of smashing into everything in sight (moving or not)? Tired of picking up the pieces after every "controlled" stunt? Introducing THE 3D-printed bumper that turns your monster truck into an unstoppable…
I designed these arm bumpers to go on like socks and to NOT soft mount the motors when installed. there are two versions one with cross bars and one without, if you are printing bumpers for cross bar arms print one normal and mirror the…
A small case for the picotracker. Good for protecting it from scuffs and dings, especially if you carry it with you. I wanted it to be totally usable without needing to remove it from the case, so all ports are accessible without needing…
Bumper was built to work with longboards from Skateshred (https://www.skateshred.com/wholesale-blank-longboard-decks/38-and-40-x-9-5-drop-through.html) The original design intended to connect to the central mounting location for the…
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.
This bumper will replace the rubber stop on the firewall of a Peterbilt 389. Printed in TPU with 4 walls and 40% infill. Feels and functions just like originals
Printed on an Ender 3, default settings (TPU) from Prusa Slicer. 2x took about 1.5hrs. Perfect fit
pare-chocs AOS35 droite et gauche en TPU . les parechocs ne sont pas simétriques les espacements des renforts sont plus ressérés pour plus d amortie sur le devant, si vous préférez plus mou en avant il suffira de les inverser. le…
New version of my previous design. Main features: Uses standard TT-01/TT-02 bumper foam (modifications required) Clears large tires on the MF-01 off-road variants It can be used with front mounted body posts (#51253) Thicker top plate…
I recommend printing these out of TPU but other materials should work as well.
I purchased a used Mission Engineering expression pedal for my Helix, but it came with ony 2 of the rubber bumper/feet missing. Instead of buying replacements, I decided to create and print better bumpers from TPU rubber, as 2 bars…
This is a thick, heavy-duty protective case designed specifically for the iPhone 17 Pro , using official device dimensions for a precise fit. The case features a reinforced outer shell, strong perimeter bumper, and extra-thick walls to…
Simple modular TPU bumpers for the Super Drum 70 that don't require reprinting your drum, require low hardware, and let you decide how much coverage you need. Works well with just a couple walls and very little gyroid infill, so maybe…
After removing the front numberplate on my 996, I was left with 2 square holes where the surround bolted to the car. these plugs are designed to fill in the holes to give the car a smooth look without having to have the whole bumper…
Bolts into stock Traxxas TRX4 frame, obviously not a functional spare, makes it look more like a Jeep. I printed them in black PLA and they hold up fairly well.
Blanking plugs for Boxer / Ducato / Relay bumper holes I printed in PLA because that's what I had set up.. will replace with TPU at some point. They are a tight fit so you will struggle to get them out. If you need to re size, I'd suggest…
European market bumper corner protectors for golden era Hondas. Simple model, but I had a set on hand and wanted to give it back. Print in TPU or use to print a mold and pour rubber. Maybe you want to see how they'll look before you shell…
Bumper for the glove box compartment of a Volvo V40. Designed to be printed in TPU. 🖨Recommended print settings: Print flat with supports under the peg; 3 walls; 20% infill.
Vanity Tray Risers (TPU) These risers are designed to add height to vanity trays that already have standard anti-slip bumpers installed. Material: Printed in TPU to retain the anti-slip properties of the original feet. Fitment: These…
Adapter to use 50mm bumper plates on a 30mm barbell or dumbbell. You have to vary the scaling slightly so they fit perfectly. The innerpart is printed in PLA, the outside in TPU A95.
This is a hybrid dual-material bumper case for the iPhone 17 Pro Max, inspired by Apple’s original bumper case and redesigned for modern camera bumps, MagSafe, and multi-material 3D printing. The case is designed specifically for IDEX…
un parachoques mejorado al original de duke doks porque el original no cubre toda la rueda sin emabrgo este cubre toda la rueda y mide 176mm
Main use is for CAD purposes, or when as usual there is no stock (welcome to EU) and you do have a printer but no supplier or funds;) Mind though that in my knowledge there is no print material that comes close to BANG bumper plastics. So…
Sacrificial skidplate for the bumper found here: https://www.printables.com/model/1569599-torque-bumper-for-xr NOTE: V1 is discarded. V2, just like V1 is a horror to print due to the large chamfer. V4 is better printable but not optimally…
Carson Virus 4.1 Stoßfänger vorne, Mit Virus Schriftzug. Kann stehend oder liegend gedruckt werden. Perimeter : 6 Infill: 90% Gyroid
I designed these PrimaLuna ProLogue Premium EL-34 Remote Bumpers because original ones disintegrated. Printing Notes Print “by object” to get the best effect Black TPU reminds original orings, you can go with any color you like No…
I couldn't find a model for the original shape & size of the Vibroplex Bug feet or what they call "bumpers", so I designed this. It should be the same size as original. I printed them out of TPU at 50% infill, you could probably get away…
Reference Guide I printed this with bambu labs 95A HF TPU 15% grid infill, 5 wall loops. Came out softer than the stock foam one. 50% grid infill, 5 wall loops. Came out a little firmer than stock foam one. I would say 40% grid infill is…
A replacement rear bumper part with holes for the trailer hitch for the Mogster 4x4 with the tipper I did this as a remix, as I used Jan's trailer part which works really well, but their rear bumper part didn't fit with the tipper…
New vacuum hose deflector for Makita guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…
New vacuum hose deflector for Festool guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…
Here you find parts/accessories for the IFlight Nazgul5 v2. I have attached photos of the print orientation for the TPU feet. RX antenna mount will also work for any FPV with post 20mm apart. Feel free to let me know if you any…
This is a corner guard designed for an island or table. The model is set for 1.5" depth. But it can be scaled for any size of table. It is simple to scale for other depths. Here is a quick table with examples but keep in mind you can…
Dale una nueva vida a tu Kindle de 4ª generación (el modelo clásico con botones físicos y pad central) con esta funda protectora tipo bumper. Este diseño ha sido creado específicamente pensando en materiales rígidos . A diferencia de las…
Esta es la versión flexible de mi funda para el Kindle de 4ª generación . Diseñada específicamente para ser impresa en TPU , esta funda ofrece un ajuste tipo "guante", manteniendo el dispositivo ligero y protegido sin añadir volumen…
I purchased the HackRF Pro by Great Scott Gadgets recently, and as it seems to follow me around a bit I thought I should add a bit of protection for if/when I drop it, and maybe add a touch of colour. I have printed mine in TPU95A, so…
Overland front bumper for Witch and Towing Eye form Ali. Winch: https://www.aliexpress.com/item/1005007636626511.html?spm=a2g0o.order_list.order_list_main.165.4d6a1802l0I5ow Towing Eye:…
This Olympic barbell holder is a functional, print‑friendly design built to keep your bar safely off the floor and out of the way. The geometry is optimised for strength, with thick walls, generous fillets, and load‑bearing surfaces that…
Use TPU filament at 100% infill density and normal supports (no tree). Lay the outside surface down on the plate. Mirror the part in slicer for the other side. As always, I recommend to use the .step file over the .stl file if possible.…
Beckett slab bumper 50 minute print time. Print in PLA if you print please leave a review and like
Flexispot E1 Vacuum Bumper My Roborock vacuum would often drive up onto the feet of my Flexispot E1 standing desk while cleaning due to the front of the foot cap being sloped. Sometimes, this would lead to the vacuum getting stuck. This…
A quick way to add super bright lights to the 3D Sets Mogster Overland, just screw 2 M3x6 screws into the light mounts. Replaces the central section of the Mogster Overland bumper
Hello! While upgrading my V2.4 i ran into a problem with my X Endstop. It would not get triggered when mounted on the toolhead mount. This happens in the combination with the CNC Xol/A4T mount with CNC Live idler XY joints from Vitalii3D.…
A replacement mag bumper for the thin, talon geometry, ZWQ mags. Fit is semi loose, I've printed these in PLA+ so I wasn't after a friction fit. I can add a tighter fir for TPU or other soft materials if people want it, just leave a…
It has 4 integrated alignment pins that you can just melt down with a soldering iron in order to hold it tight in the frame. Comes in 4 variations for all your mounting needs. 0.4 mm nozzle Prints great at all layer heights. PLA works…
Recambio bumper para rc XPRESS FM1S. Imprimido en PETG con cuatro perímetros y relleno 15% giroide. Colocar soportes en la parte donde se monta con el chasis del coche. Replacement bumper for RC XPRESS FM1S. Print in PETG with four…
Sprinter Van - Rear Door Magnet Bumper Housing - (T1N 2002-2006) Replaces Mercedes Sprinter T1N | Part Number: 901 740 03 16 (not exact match but it works) Designed this replacement after the original cracked from rust expansion. Pause…
mounts directly to the frame, no bumper support required. lines up with original scout body - only works with deadbolts with original body hardware needed: 4x original screws or 2x M2 screws
Simple rear bumper for the Axial SCX24 Deadbolt. mounts straight to the rear of the frame without need for a bumper mount. lines up with the stock scout body. the loops are for aesthetics, i wouldn't recommend putting tow hooks on it…
Bumper case for the gSCARTsw line of video switchers. There are 3 versions of the bumper 5.2+ works with all MicroUSB style gSCARTsw 1.4 works with older units with barrel jack plugs VGA works with some of the oldest switches, any with…
I had a pair of O Scale Fast Track Earthen Bumpers from Lionel. But for as long as I've had them, they've not had the little wooden pieces. I didn't even realize that they were missing until the bumpers started having issues this year! 3D…
Comes in 2 versions. 4 Screw or just 2 Screw, depending on what is already attached to your Pi. Holes are sized for self-tapping M2.5 screws. 0.4 mm nozzle Prints great at all layer heights. PLA works well PETG or other materials are…
Customizable TPU bumper. ✏ FreeCAD file included for customization. 🖨 Print recommendations: Print with supports under the peg (see last image); Vary infill and wall thickness to adjust stiffness. A good start is: 3 perimeters; 20%…
Pretty simple...a 10mm TPU dot for all bumper/grippy feet needs. I used foaming TPU(ultimately 66A) and they turned out great. Ended up printing a 100 or so.
Really like this stock bout found with the 10 round mag I am using it wants to escape a bit too easily. Made this out of tpu to help grip the mag
This is a simple TPU door handle bumper designed to prevent wall damage. The model has two 20 mm inner diameters. One side fits over a standard door handle. The opposite ring acts as a flexible impact buffer against walls or furniture.…
Corner desk bumper Printed from TPU, 0.2mm drop, 15% infill. Size: 40x40x40
An oversize load sign to screw on the provided bumper with holes in it
Printed on my Prusa mk3s @0.10 layer and after i printed on my Elegoo Mars @0,05 layer. obviously the resin printed one it's way better (printed with a mix 50/50 of elegoo ABS Like and Syraia mix (blu+tenacious 60/40) please leave a like…
Replacement bumpers for a few types of Tromner reflex hammers. So far, I've made replacement bumpers for the very popular MDF Tromner series (fits plastic and steel models), the famous V Mueller, the Miltex 1-211 (my personal favorite),…
This is a hybrid dual-material bumper case for the iPhone 17 Pro Max, inspired by Apple’s original bumper case and redesigned for modern camera bumps, MagSafe, and multi-material 3D printing. The case is designed as components to be…
Protect your UniFi Travel Router with this bumper case. Shock-absorbing corners guard against drops, bumps, and scratches. Precise cutouts ensure full access to all ports and buttons. Printed in TPU 90A
Parametric design made in Fusion you can customize to fit any furniture you want and protect the corners from hurting yourself or your toddlers. How to modify it Open Fusion and the provided file Click on "Modify" from "Solid" tab, and…
10mm channel negative space added so 10mm LEDs can slide into the channel securely without the adhesive.
A modified pintle hitch that works with (RC-Time)s axial cj7 rear bumper that i modiefied
I designed these flexible bumpers to slide onto my kitchen cabinet handles yo prevent them from damaging my walls. Instead of stick-on dots that fall off or collect grime, these are permanent, adjustable, and custom-fit. This model is…
Will fit the Thor301Box and slide ride into the original XR rails. Print with PETG-CF or Nylon ( covering sun exposed parts recommended).
