P1P / P1S 5inch Screen Enclosure Tilted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for the 5" JC8048W550 screen. Mounted to the front of bambulab P1 series printers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
As there were some people asking for a tilted Version - Here it is (Original Version).
Clean installation for a 5inch touchscreen (JC8048W550) on your Bambulab P1. Original display will face upwards after this modification.
I used a USB Pinboard for Power-Supply to my screen.
Running the USB-cable through the slot in the front plate is a little bit tricky (maybe you need to increase the thickness of your usb-plug a little bit).
Screws are needed in the sizes DIN912 M3x8 (4x) and DIN912 M3x12 (4x).
Cover can be printed with or without Bambulab logo (for version without logo just use one color for the whole cover).
The Stock Screws can be stored in the Front-Part (to ensure youll find them if you want to get back to the original design).
Attention: Threads of Bambulab-Screws are not the same pitch as the DIN912. Maybe you need to use a tap to change the pitch (Bambu-Scres will still work).
For Step-by-step Assembly Pictures please take a look in the Original Version.
USB-C connection can still be used (only need to take off the front cover). Please ensure that the display is not powerd from the printer while using the USB-C connection (installing updates for example).