Liczymy pasujące modele…
I liked having the screen mounted perallel as my printer screen is located at eye level when I am sitting down. Due to that modification, The Xtouch mounts by Teaching tech would not it. This remix fixes that. I used M3x16 screws all…
I was using a color printout for the last longest time with my xtouch mini and the wonderful SW from https://rsjaffe.github.io/MIDI2LR/ to speed up my lightroom workflow without buying all the expensive gadgets out there. I became unhappy…
Upravený zadní kryt pro xtouch, pro novejší verzi obrazovky
I was using a color printout for the last longest time with my xtouch mini and the wonderful SW from https://rsjaffe.github.io/MIDI2LR/ to speed up my lightroom workflow without buying all the expensive gadgets out there. I became unhappy…
This 3D printed holder for the Wegovy FlexTouch pre-filled pen ensures safe storage and convenient travel use. I based the needle plunger on an insulin pen case design that I have been using for a couple of years. Have a look at the great…
The original model has incorrect standoff length and does not account for the PCB thickness. This causes the back panel to bend. I shortened the 4 standoffs for the PCB by 2mm, and this greatly improves the fit of the enclosure.
Upravený zadní kryt pro xtouch, pro novejší verzi obrazovky
Sorry, only for bigger printers. ;-) You can find the version for smaller printers here . The storage area is much larger and there is the possibility to store two TV remote controls. 242.5mm length - 198.46mm width - 67mm height The head…
Bigger storage container for Novo Nordisk flex touch pen 1mg + (V2)
Slim case for bambulab printers. Requires 4 M3 brass threaded inserts and M3 countersunk screws.
A wall holder for my Behringer Xtouch Mini which I'm using to controll Adobe Lightroom. Print Settings Printer: Print Rite DiY 3D Rafts: No Supports: No Resolution: 0.2 Infill: 30% Category: Audio
A remix of the low rider X1 and P1x tool tray that allows for the XTouch ESP32 touch screen. There is a cable channel to help hide and secure the USB cable that powers the screen as well.
The screen I bought for XTouch doesn’t match any of the revisions found online, so none of the existing cases fit. I combined and modified two designs I found, and ended up with this. Maybe it’ll be useful for someone. The enclosure was…
This 3D printed holder for the Wegovy FlexTouch pre-filled pen ensures safe storage and convenient travel use. I based the needle plunger on an insulin pen case design that I have been using for a couple of years. Have a look at the great…
This is a stand for the XTouch Mini MIDI controller. Two identical legs snap onto the Mini and hold it at a comfortable angle for use.
Storage container for my new Novo Nordisk FlexTouch pen and associated needles. It stores the pen and 4 needles. The two shallower holes on the right act as temporary storage for the lids when pen and needle is assembled and in use. Hinge…
Elevated stand for behringer xtouch mini MIDI controller. Because when its lying flat its not so comfortable to use. Two versions included - one with 27mm elevation, so my friends Keychron keyboard can fit underneath it. You can read…
This is addon to my Xtouch stand model - allows to mount usb hub on a swivel (see photos in desc) I've included original stand model as well. Modelled for fit, you might adjust your printing settings and/or use tape to offset gripping…
New improved version: https://www.printables.com/model/576209-xtouch-5-28-inch-screen-for-bambu-labs-p1-x-touch Please view these install instructions before you attempt from ModBot: https://youtu.be/XCYwEz-h4BY?si=L5MrpFyuCuMa_TMc P1…
I wanted to easily attach and remove the P1Touch screen in case I needed to tinker with it. I was using a snap on faceplate for the original screen, so I merged it with some other files and filled in some gaps. I added the logo as…
This is a mount for the 5inch & 2.8inch XTouch mod. It mimics the X1C screen and allows for easy access to the original Bambu Lab P1S/P1P screen. Software only supports 2.8 inch screen at the moment. But can easily be upgraded when…
Update: added cutout for sd card access. I have redesigned the xtouch screen mount by Xps3riments/leejsmith to use a snap case that is slimmer and doesn't require any screws, The snapping is an accident but it holds well enough for it's…
I have make 2 Version of the Front. With a Touchpen Holder and a Version without a Touchpen Holder For the Mount i use this version here: https://www.printables.com/model/562889-p1-touchphone-mount-for-p1-series-bambu-printers You nee 2x…
I took the idea of Tack to have the touchscreen mounter in the phone hole, but I wanted it at a similar height of the original screen and also I wanted to hide the cable. I found that you can power the touchscreen using the supplied…
I really liked ZachW's model for the XTouch with Wyze Cam v2 mount, but unfortunately, the models was blocking access to the USB power supply port. Using Tinkercad, I modified the file to be able to have an open access hole for the port.
I have made my previous model compatible with Xtouch with sdcard slot, holes for back buttons and access holes for the temp sensor. Mount now has channel for the cable. There are two versions ; For one you'll need two 3x4x5 heat inserts…
I have made my previous model compatible with Xtouch with sdcard slot, holes for back buttons and access holes for the temp sensor. Mount now is a ball mount and has channel for the cable. You need to superglue the ball part to the arm…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Mount for XTouch screen on the original P1P screen. Model has a holder for stylus which comes with the screen. It also has a cable mount and I added some cable holders to safely guide the cable in the inbuilt P1P USB connector. I added a…
My printer is on a lower table so I needed a harder angle to see the screen better.
The Rear Mod - for hex socket bolts (6x M3x10)
I liked the flip up design but with the enclosure on my p1p it didnt fit so i remixed it to flip down and added a magnet
Added hole for use be cable for powering the board. Addation hardware required 2 m3x12 screws orginal screws from p1p can used to secure screen into postion.
My ESP32 touch screen gets intermittent wonky network connection issues and I seem to keep needing to reboot the device from time to time. This rear cover allows me to do that without taking off all the screws to keep the plate in place.
For hinge part, use supports default and snug For front with logo, use supports default and snug For front no logo, no supports needed For back, no need for supports Bambu logo itself can be glued on the front Right angled micro usb cable…
I wanted a smaller case for my XTouch and liked the Alien 3D deck remix. I also wanted to mount on the side of my P1S. This is a simple remix of the back mount that can be double sided tape to the case.
required hardware: 2pcs M2.5x12 mm Screws 4pcs M2.5x5 mm Screws 4pcs M2.5 Nuts 1pcs usb to JST 1.25 4-Pin Connector
UPDATE: I'm an idiot and just realized that I based this off a remix from Maker World that integrates the stylus into the enclosure. (Apparently Prusa will not let you link to Maker World. Very cool. Search “ remix xTouch enclosure added…
Print with no supports, 0.2mm works fine. The holes are “plugged” on purpose, to facilitate printing without supports, if they are still closed after printing is finished, clean it up with a properly sized drill bit, or even force through…
Easy to print case for the xTouch Display for bambulab P1P/P1S Print with Tree-support as shown in the sliced picture. Display can be mounted with screws in the inner case, but they are not needed. Just slide the display inside the…
The original model has incorrect standoff length and does not account for the PCB thickness. This causes the back panel to bend. I shortened the 4 standoffs for the PCB by 2mm, and this greatly improves the fit of the enclosure.
Added pen storage + optimized parts for cleaner look or better printing.
A little cable guide for the power supply of the Xtouch when mounted near of the original screen. You can use double side tape for the fixation. the second part just clip on the first. Now my Bambu Lab look less like a modded ender…
As xperiments confirmed on their github page https://github.com/xperiments-in/xtouch/issues/77 , the 5" ESP32-8048S050 screen support is in the works, I've decided to create an enclosure to install it on P1 series printers, the design is…
I used my favorite features of other X-Touch enclosures and added some features to make it a cleaner and easier install by splitting the back. The split back design lets you install the ESP32 first before plugging in the USB cable and…
I have my P1P on a dresser. So i printed a part for a negative angle of the display. Also i like to have the XTouch display now. I was inspired from the great idea of Geoff Pedder, mount XTOUCH display with magnets. So it is easy…
I created this housing so I can centralize all my xtouch screens. I used 180-degree micro usb cables for easy connections and so I didn't have to make the housing too big. all you need are the micro usb cables and m2.5x6 screws. I also…
Materials Used : You’ve printed this model using PetG , but it’s also compatible with PLA . The choice of material ensures durability and stability for holding the display securely in place. Attachment Mechanism : The Xtouch Holder…
XTouch - Temperature sensor case Bambu Lab P1S DS18B20 Temperature Sensor: Can be added to printers without an integrated chamber sensor. Provides accurate chamber temperature readings and enhances XTouch functionality. Temperature sensor…
Made some cutouts for cable management
This can be printed using anything, but I used PETG at 0.20 layer height and 2 walls. Its pretty simple to print and does not need supports. I also added a “spreader” to the part so that the “big support” is more securely held to the…
Provide better support for the XTouch display. When you press on the touch screen it has a solid feel and won't pop off. I modified the original “big support” to be wider and added arms to make contact with the printer enclosure. This…
Software and installation; https://github.com/xperiments-in/xtouch After an extensive search online for the perfect case for the ESP32 touchscreen, I couldn’t find anything that met all my needs. So, I decided to create my own design with…
Small holder for the stylus that comes with an ESP32-2432S028R aka CYB used in the Xtouch project. Slots are added to be able to glue in 2 6x2mm magnets on the back for mounting to the side of a printer.
I've included version with the added piece for mounting additional hardware, and just the standard spacer, but with tightener tolerances and the locking mechanisms in both a version that uses an M3 heatset insert, and one that just screws…
