XTouch (P1Touch) Support and Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for the P1touch touchscreen installable in the hole on the right
- Ocena
- 4,4 / 5
- Polubienia
- 38
- Pobrania
- 212
- Wydruki
- 5
- Wyświetlenia
- 1500
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I took the idea of Tack to have the touchscreen mounter in the phone hole, but I wanted it at a similar height of the original screen and also I wanted to hide the cable.
I found that you can power the touchscreen using the supplied connector so I made a slimmer case with a hole in the back for the cable.
The stand was made on a P1S hole (dunno if the P1P is the same), which have 2 different heights inside for the lock mechanism, that's why the legs are different.
You can press the 2 sides to insert and remove the support, and should have the same hole as the other model.
In the end I found that with precise tolerance the back stands in and you don't need any screw, aniway i already did the screw version so I uploaded both just if someone prefers screws.
I printed it in PLA 0.2mm without any support, I suggest a higher infil for the support to increase stiffness (I did 40%).