XTouch (P1Touch) Support and Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for the P1touch touchscreen installable in the hole on the right
- Rating
- 4.4 / 5
- Likes
- 38
- Downloads
- 212
- Makes
- 5
- Views
- 1,500
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I took the idea of Tack to have the touchscreen mounter in the phone hole, but I wanted it at a similar height of the original screen and also I wanted to hide the cable.
I found that you can power the touchscreen using the supplied connector so I made a slimmer case with a hole in the back for the cable.
The stand was made on a P1S hole (dunno if the P1P is the same), which have 2 different heights inside for the lock mechanism, that's why the legs are different.
You can press the 2 sides to insert and remove the support, and should have the same hole as the other model.
In the end I found that with precise tolerance the back stands in and you don't need any screw, aniway i already did the screw version so I uploaded both just if someone prefers screws.
I printed it in PLA 0.2mm without any support, I suggest a higher infil for the support to increase stiffness (I did 40%).