P1P XTOUCH Tilt Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Mount for XTOUCH display, Inkl. Tilt angle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I have my P1P on a dresser. So i printed a part for a negative angle of the display.
Also i like to have the XTouch display now. I was inspired from the great idea of Geoff Pedder, mount XTOUCH display with magnets. So it is easy removeable. Also i want the usb cable going in on the top - not an the left side.
So i mod the xouch mount from Geoff with a tilt angle and a bigger xtouch case. The bigger case have more weigt, so the magnets are near the capacity, holding the display. With the 12mm magnets the diplay holds now tight.
Dimensions now: 218mm for the complete mount and te case is 115mm x 54mm
Print the mount with slim tree support.
You need 4x 12mm magnets