1 / 3
TAU 250K slim - remote sleeve / gate opener / Toröffner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My TAU remote broke while I had it on my key chain. I created a sleeve, printed from TPU, to have a fix for the remote.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed on an A1 in GEETECH TPU. I used the normal textured steel sheet with a little of glue stick on it. Worked perfectly fine. I used auto tree support for the overhangs. Removal of the support was ok. No big issue.
I printed with low speed to have a good layer adhesion.