Spool Holder for 2kg spools, (hook and rod under table)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These holders attach to the underside of a table top to hold big spools using a rod as a through axle.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got 2 kg spools of filament and needed to respool to a smaller diameter to fit my dryer. As I already had a pipe on hand and a table to mount it to, the choice of design was easy: modelling a simple but hefty hook design to hold big spools for respooling.
Designed to fit a pipe diameter of 25.8 mm or less and a spool diameter of 300mm or less.
The screw holes are counter sunk and fit regular dry wall screws.
This part can be printed laying down on the print bed with the side that's later facing the spool. Just mirror the part in your slicer to get the other side or use the OBJ to print it.
I used PETG with 2 perimeters and 10% infill.