Articulated Mount Tuya Motion & Illumination Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for cheap, round Tuya motion and illumination sensors
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
This is a mount for cheap, round Tuya motion sensors. I used Sonoff SNZB-03 sensors before, but those have no illumination sensor. Since I had them mounted already, I decided to adapt the mount to fit my new sensors. The original model can be found here.
Here are the measurements of my sensor, in case you have a similar looking one:
housing diameter | 32.5mm |
housing height (without PIR sphere) | 16mm |
PIR sphere diameter | 22.3mm |
total height | 28mm |
Additionally, I added a base version where the plate and ball joint are joined. I found that the maximum angle of the ball joint alone is enough for me. This makes printing easier and you don't need to fiddle around with magnets, screws or CA glue. I glued the base to the wall using some double sided tape, so I do not need the screw holes either.
Of course, since this holder is compatible with the base of the original, you can still use a different way of mounting the base to the wall.