Liczymy pasujące modele…
Update 12/25: I added a threaded version. Use that if you don't trust the press fit between the two parts. The thread is equivalent to an M10 threaded bolt. ---- Update 12/25: Ich habe eine Version mit Gewinde ergänzt. Das Gewinde…
Introducing the Sleek Illumination Desk Lamp—a stylish fusion of lighting and functionality designed for contemporary workspaces and cozy reading nooks. This modern lamp features a minimalist frame with a built-in shelf, providing a…
I modified Torstens lamp shade to fit my modified illumination spike
On the Qidi Plus 4, I wasn't entirely satisfied with the internal lighting, especially when printing with all the doors closed and the tinted glass casting shadows on the rear area, making it difficult to monitor the progress of the…
This is my design for a stackable letter tower that can (and should) be illuminated from the inside. It is a two-color print, with one color forming the shell (or frame) and the second—preferably transparent—creating the fill. The set…
Umgeschrieben für das Duet Original Code https://github.com/FrYakaTKoP/simple-octo-ws2812
This is a mount for cheap, round Tuya motion sensors . I used Sonoff SNZB-03 sensors before, but those have no illumination sensor. Since I had them mounted already, I decided to adapt the mount to fit my new sensors. The original model…
Update 12/25: I added a threaded version. Use that if you don't trust the press fit between the two parts. The thread is equivalent to an M10 threaded bolt. ---- Update 12/25: Ich habe eine Version mit Gewinde ergänzt. Das Gewinde…
Spring-loaded holder for the buttons in the Ritto handsfree unit (TwinBus video handsfree unit RGE17875, RGE17877)
🧑🎧🧢 Head Headphone Basecap Stand – Stylish, Practical & Illuminable! 💡 This is my 3D headphone & basecap stand – a true eye-catcher and a practical solution for storing your headphones, basecap or … ! Two versions for cooler look: I have…
For the MK3S there is a fan shroud with LED illumination (https://www.prusaprinters.org/prints/13622-mk3s-led-nozzle-duct), but not for the MK3S+ AFAIK. So I added some blobs with holes to the original shroud from Prusa. The original…
See the original: https://www.thingiverse.com/thing:903332 Jansjö projects a smaller cone of light / narrower angle then a power LED without extra lens. Also I printed at a rather high speed. So the effect is far from perfect. I'm still…
Introducing the Sleek Illumination Desk Lamp—a stylish fusion of lighting and functionality designed for contemporary workspaces and cozy reading nooks. This modern lamp features a minimalist frame with a built-in shelf, providing a…
Um die Qualität der Nachsicht bzw. die Ausleuchtung für unser Babyphone (Momcozy BM03) zu verbessern habe ich bei Amazon um ca. 8€ dieses Infrarot Modul auf 940nm IR Basis gekauft. ->…
LED Illumination MOD for the Anet A8. You don't need to print anything! I'm always trying to get the best result with minimal effort, and this is the perfect example. On Thingiverse you can find some structures made for support leds for…
Printed in ASA but you might have to adjust scale to work best with your printer.
LED Strip Holder – Light-Blocking Remix This project is a remix of the LED strip holder included in the LDO kits for COB LED strips used to illuminate the printer chamber. The goal of this modification is to restrict vertical light spill…
Problem: Even though I have my enclosure lit up like Area 51, I still can't see shit directly AT the nozzle because of all the shadowing created by the extruder assembly. I was going to try out the PrinterMods.com Hotend LED Kit, and I…
I modified Torstens lamp shade to fit my modified illumination spike
Playing darts gains more and more popularity, especially around the time of world championship games in December/January. Playing and practicing for a few years now, I wondered how to optimize the conditions. The illumination was one of…
A modified version of the wonderful Illumination Cat by Agent Cain, turned into a physical print-status indicator for Klipper / Moonraker 3D printers. The original Illumination Cat just glows. MoonCat adds a small OLED display and a…
I have the RasPiO InsPiring Circle ( https://rasp.io/inspiring/ ) and wanted to use it to illuminate the glass cabinet in the living room. I created this small ring to elevate the led circle a little bit (as the contacts are below) and…
A hemispherical dome with LED illumination for photography. All parts should be printed with white filament, except for the table (can be other color and defines the background color). L = Large Dome M= Medium Dome S= Small Dome For more…
Illumination Kit for Traxxas Rustler Material: PETG Layerheight: 0.2mm Infill: 50% More in our blog: https://makerteam.de/blog/traxxas-rustler-illumination/
Diffuser for dark field illumination, 32mm diameter, for transmitted light condenser. Print Settings Printer: Renkforce RF100 Rafts: No Supports: No Resolution: 0.1mm Infill: 100% Category: Biology
Template to create your own Christmas Bauble - with personalised glowing Image | Instructions | 1. Download template (Jpeg in Zip Attachments) and make your own design . Keep the total image dimension unchanged (4740px x 1917px) Remain…
Based on the beautiful model “ Personalized Christmas Bauble - Lithophane Template for Advent or Illumination ” by chrise_2000 ( thank you for this). When making one, I realized I wanted to have a glue aid to center the interface on the…
I made a little holder to put a LED strip underneath the toolhead, so i got the light where i need it. It is a simple and easy printable part, which clicks onto the the spacers. The cable can be laid as the cable from the endstop. You…
LED fixture for 3018 CNC milling cutter LED ring type: 12V, 60mm Ring with COB LEDs, cold white At 12 volt you need a 20 Ohm/2W series resistor, otherwise the leds are too bright
Designed this main because I have a spare 120mm PC fan and a rusty Ikea style lamp stand. Brass insert holes on the LED holder are added for add-ons, such as magnify glass, carbon filter holder. I was using a 8mm width LED strip with 12V…
In the "Multiled QT" model from the manufacturer GS Vitec, two 24V fans are connected in series. After these broke down, I have constructed a cover for a single 48V fan here. So this is a replacement part, or an improvement on the…
Older LED strip got broke, so I bought new LED strip, 24VDC, just cold white, no RGB ding-dang. Designed ne brackets and lit up my Voron again. Light angle adjustable. LED is 5mm wide, holders are attached via M3-T-nuts. Brackets need…
This model is a perfect addition to your interior, providing a unique and stylish accent on any wall in your space. The set includes two types of models: a single-piece design and a divided version consisting of five parts, which is ideal…
Commercial indirect wifi-controlled lighting system that I know are very expensive, and at the same time limited: If you want to to use it as the main light source - and not just a deco-effect, you need to direct the light into the room…
Simple wrist watch holder decorated with a fantasy captain Nemo submarine. This submarine can be decorated with interior items like stearing wheel , seats , boxes and so on. In the holder base is enough place for electric switch plus…
The model has the pass trough hole which can be used to illuminate the eye using the LED from the pump. The eye could be printed in different material/painted to really shine (as example used original model picture). I was concidering…
This illumination system was created using a 30 mm. heatsink, a High-power Star LED , and 8.7° 20mm Circular Beam Optics Lens. The assembly instructions can be found on the free documentation. This light holder can be applied to many…
Das Modell einer „Fliegenden Untertasse“ wurde vermeintlichen Fotos aus den 1950er Jahren nachempfunden. Mit elektrischen Teelichtern kann die Unterseite und der Zwischenring zur Kuppel stimmig illuminiert werden. Das UFO-Model besteht…
Eine ansprechende Geschenkverpackung für kleinere Geschenke, wie Uhren, Messer, Taschenlampen, Schmuck, aber auch für Gutscheine, Geschenkkarten und vieles mehr. Ein elektrisches Teelicht kann eingesetzt werden, um das "Triebwerk" zu…
These are additional files to support lighting up the original designers lamp design. I choose to use USB powered LED strips so it could be easily internally powered if desired. Otherwise, simply running a long USB cable out of the bottom…
Printed in three parts that need to be glued together. Optionally, you can insert two 3x30mm steel dowel pins to increase the strength of the glued part. Material 10mm wide 12V LED strip 4pin XLR male connector 80cm cable 2x 3x30mm steel…
Introducing 'Patriot's Creed Illumination'—a stirring light box embodying the resilience of 'We the People' since 1776. The powerful statement, 'We were not ascended from weak men,' serves as a bold reminder of our shared history and…
Introducing 'Patriot's Creed Illumination'—a stirring light box embodying the resilience of 'We the People' since 1776. The powerful statement, 'We were not ascended from weak men,' serves as a bold reminder of our shared history and…
This is a flexure device that uses flexible sections of the print as hinges and springs. It holds a hypodermic needle to an OpenFlexure stage so that it can be used as a probe. It was designed for the RepRapMicron Project…
Printing Tips I used Prusament PLA in Jet Black, which looks very good with the black Mitras fixtures I have. The model files I've uploaded include the settings I'd recommend: I used Prusa “0.20mm QUALITY” with a couple of modifications:…
This is an extension-set for a hemispherical dome with LED illumination for photography. All parts should be printed with white filament, except for the table (can be another color and defines the background color). For more information,…
This Cat was created in cooperation with fryakatkop and has two use cases. On one side you could flash a simple sketch like the adafruit neopixel strandtest and use it as a simple night light. On the other side you could flash the…
After I saw this I knew I had to make it for the Illu cat ^^ As for the Illu Cat there is an easy and a hard to print.
These are mounting brackets for the AI Blade LED fixture by Aqua Illumination. You need 2 M8 bolts and a couple of M3 screws to complete the project.
Note: This file set is an extension to the HomeCube enclosure project. To make use of this file set, you have to download the basic file set and building instructions PDF as well. These are the printed parts needed for inside illumination…
