RF Choke/Balun FT114-31 Enclosure Revised
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple enclosure to hold an RF choke or a balun based upon an FT114-31 toroid with easier connector access
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-31 toroid 2631801202. Note that FT114-31 toroids have the same diameter as a FT114-43 or FT114-61 toroid, but the height is larger at 13.85mm (the toroids normally sold as FT114-43 and FT114-61 are 7.5mm tall).
There is provision for a standard 4 hole BNC connector at both ends. This version is easier to wire up - you can wire it up outside the enclosure and drop the assembly in from the top. The lid can be glued on once complete. The photos show a choke example for 28MHz wound with 10 turns PFTE wire which I made for a coaxial vertical dipole.
I printed mine in PLA with a 0.6mm nozzle at 0.3mm layer height. This is a for portable equipment so PLA will be fine.