Saw Guide - Two-sided and Magnetic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-sided magnetic saw guide for cutting wood at 90 degrees.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a guide for sawing wood at 90 degree angles, with longer and shorter sides to support different board lengths (often used for joinery).
The print is designed for usage of 5 magnets @ 12mm x 3mm - I used some from this pack
I created it for printability, so I recommend printing in the orientation shown in the 3mf file. No special settings necessary, although if your prints are print to warping on the bottom then use a brim. Note that if there are any layer shifts or printing errors, it may no longer be 90 degrees. Also, project files are included so you can freely modify to support different sized magnets.
Design inspired by Japanese woodworker TWCDesign