Saw Guide - Two-sided and Magnetic
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two-sided magnetic saw guide for cutting wood at 90 degrees.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a guide for sawing wood at 90 degree angles, with longer and shorter sides to support different board lengths (often used for joinery).
The print is designed for usage of 5 magnets @ 12mm x 3mm - I used some from this pack
I created it for printability, so I recommend printing in the orientation shown in the 3mf file. No special settings necessary, although if your prints are print to warping on the bottom then use a brim. Note that if there are any layer shifts or printing errors, it may no longer be 90 degrees. Also, project files are included so you can freely modify to support different sized magnets.
Design inspired by Japanese woodworker TWCDesign