Piranha Death Racer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will you lose your head? Death Racers are 3d printed combat robots featured at RepRap festivals around the US and the UK
- Ocena
- 5 / 5
- Polubienia
- 94
- Wydruki
- 10
- Wyświetlenia
- 3512
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Death Racers are like remote-controlled Rock ‘Em Sock ’Em Robots! Drive them around and compete against two or more other racers to try taking off your competitor's head!
The Death Racers were the brainchild of Michael Baddeley and Sam Prentice and have become a reoccurring event at 3d printing gatherings like 3D Printopia, Rocky Mountain RepRap Festival, Midwest RepRap Festival and the Sanjay Mortimer RepRap Festival in England. Historically, the files could be found (and still can be found) on Michael Baddeley's Patreon page: https://www.patreon.com/c/mrbaddeley/posts This posting has been done with Mr. B's explicit approval in order to reach an audience that may not want or are unable to use Patreon.
These files have been completely reworked for the start of 2025 and a lot of updates have been made, including a full set of thorough instructions. Check them out here: Build Guide Death Racer 2025.pdf
While there is a complete BOM included in the instructions detailing what parts and hardware you'll need to assemble this model, BIGTREETECH also offers a hardware kit found here: https://biqu.equipment/products/btt-functionals-deathracer-kit?srsltid=AfmBOoqdEOrYcgiKN9myY7THDFLK-HZU6v4YkD8NLT5HsjmKOlHAQqik
***NOTE*** There are a couple components as of right now the kits are a little short on. The BOM goes over the differences, but there are a few m3 bolts, 2mmx50mm rods and m3 heat-set inserts the kit is missing and will need to be self-sourced.
***UPDATE 1/30/25*** New DriveWheel and IdlerWheel files have been added to the Patreon and Printables repositories.
***UPDATE 9/92026*** Reinforced frame and rider have been added in a beta folder. Occasionally, impacts to the racer, especially with the added weight of a spinning weapon, would cause a break in the RearFrame right behind the rider's feet. Two additional m3x10mm bolts and heatsets were added to secure the RearFrame to the MainFrame. Next up, the rider has always had issues with staying where he belongs. To counter this, I sent an m3x16mm bolt "right up main street" as Deadpool would say and added a heatset to the Torso to fix him down to the frame.
Check out Sam Prentice's Discord, YouTube channel, and Facebook group to find out more about Death Racers and where to compete with them!