GEP-MOZ7 Front Buzzer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement front antenna mount the includes a mount for the Vi-Fly Finder 2 buzzer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I needed a way/place to mount the Vi-Fly Finder 2 to my GepRC Moz7 frame. I recreated the front antenna mount that slides/snaps onto the carbon fiber frame peg thing and it still will house the antenna, but also has a box to put the buzzer into. I'm using an ELRS T antenna from one of the happy model receivers which fits great in the antenna holder, and then if you print this in TPU, you should be able to slide the buzzer into place without worrying about it falling out. It's meant to be printed in TPU and meant to be folded to allow the buzzer to be slid into place. Once it's mounted to the frame, the mount shouldn't be able to be folded to let the buzzer slide out so it should be pretty secure!
This also includes the two cable management channels found on the original antenna mount. I used one side for the FPV camera and the other side to route the front antenna wire.
I printed this with the skinny edge down on the print bed with organic/tree supports. It actually ended up printing very well this way, but I just recommend with TPU printing this slow and it should turn out great. It's not a simple model to print, but it can come out great and it's been working perfectly for me since!