Doom keycards for your ID
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key cards for your ID cards for any purpose. This rintable is designed to be printed in 1 color printer, just program…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Key cards for your ID cards for any purpose. This rintable is designed to be printed in 1 color printer, just program pauses so you can purge and change the filament.
Personally I did it with this configuration:
Orca slicer, creality ender 3 ve SE, hright pf layer 0.2 mm Base, 30 layers, 6 mm.
- Start with blue (or main color you want)
- Layer 4, (0.80 mm); change to white (for UAC logo)
- Layer 8, (1.60 mm); change to blue (main color)
- Layer 22 (4.40 mm); change to black
- Layer 26 (5.20 mm); change to blue (main color)
Top, 22 layers, 4.40 mm.
- Start with blue (or main color you want)
- Layer 9, (1.80 mm); change to black.
- Layer 13, (2.60 mm); change to blue (main color)
- Layer 18, (3.60 mm); Change to yellow.
Is a suggestion to get different tones of main color over the black surface, as can be seen in the photos. Did it for CR80 ID, card size is 5.4 cm x 8.6 cm. However a slightly bigger card would work. Hope you like this!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0.2 mm
Notes:
Base, 30 layers, 6 mm.
Start with blue (or main color you want)
Layer 4, (0.80 mm); change to white (for UAC logo)
Layer 8, (1.60 mm); change to blue (main color)
Layer 22 (4.40 mm); change to black
Layer 26 (5.20 mm); change to blue (main color)
Top, 22 layers, 4.40 mm.
Start with blue (or main color you want)
Layer 9, (1.80 mm); change to black.
Layer 13, (2.60 mm); change to blue (main color)
Layer 18, (3.60 mm); Change to yellow.
Category: Other