1 / 3
PC-Blend Prusa Pulley with Ball Bearing and M5 Screw — zdjęcie 1
1 / 3

PC-Blend Prusa Pulley with Ball Bearing and M5 Screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of the Prusa PC-Blend Pulley for a 6902 Ball Bearing and M5 Screw

Ocena
0 / 5
Polubienia
28
Pobrania
99
Wydruki
0
Wyświetlenia
853
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

After I did my first Remix of the PC-Blend pulley I realised that finding a M4x30 screw in the local hardware store is not that easy. 

This Remix uses the same 6902 Ball Bearing but with an M5x30 screw. I also changed the pulley body so that the hole for the screw is round. The original pulley has hex holes on both sides.

The bearing used has the dimension 28x15x7

Printed with Prusament Petg

Tagi