Pair of simple feet for standing clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pair of simple feet (or feet covers) for standing clock
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 87
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament and the transition between colors looks ugly, here is the perfect rescue.
Model is supportless. It is very easy to print.
Don't forget to degrease the print bed thoroughly.
The assembly itself takes no more than one minute.
If the printer is properly adjusted, it can just snap it together and no glue is needed. Otherwise, you can just secure it with glue or double-sided tape.
Be careful, don't swap the right and left sides! You can tell which one is which by the angle of the arc.