Midi-Pro Wood-Lathe center jig for ejection-rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for handwheel / handroller for easier insert of ejection rod or thread-rod in hand"wheel" on headstock
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Use of the ejection rod for Tools in headstock or thread-rod for securing my drill-chuck in headstock always sucks, because the inner diameter of the mounted handroller ("handwheel") doesn't match the diameter of the spindle. So i made a simple centering jig for the handroller, now inserting any of the rods is easy and always centered to the spindle.
Note: Insert is slightly tapered to the top, this side goes in first. Maybe light sanding on the outside or some taps with a wooden mallet are necessary to mount it flat with the handrollers end
Printed with .24 mm layerhight, 10% infill, took 35min on my Bambulb x1c
Enjoy