1 / 8
Midi-Pro Wood-Lathe center jig for ejection-rod — image 1
1 / 8

Midi-Pro Wood-Lathe center jig for ejection-rod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Insert for handwheel / handroller for easier insert of ejection rod or thread-rod in hand"wheel" on headstock

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
143
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Use of the ejection rod for Tools in headstock or thread-rod for securing my drill-chuck in headstock always sucks, because the inner diameter of the mounted handroller ("handwheel") doesn't match the diameter of the spindle. So i made a simple centering jig for the handroller, now inserting any of the rods is easy and always centered to the spindle.

Note: Insert is slightly tapered to the top, this side goes in first. Maybe light sanding on the outside or some taps with a wooden mallet are necessary to mount it flat with the handrollers end

Printed with .24 mm layerhight, 10% infill, took 35min on my Bambulb x1c

Enjoy

Tags