1 / 2
Amcrest Dome Camera Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a Amcrest 5MP IP5M, I imagine they work with quite a few other dome cameras with around a 80mm size!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This mount is a mix of multiple models:
- The mount point is Articulating “Raspberry Pi Camera Mount”.
- The Wall Mount portion Im using is the "Wall Mount for camera flex arm".
- The connector is a ""Snap in pipe clamp"
Im not going to pretend I didnt, I exclusively used the Prusa Slicer to create this model and eyeballed most of the measurements. A good temporary solution will likely be a perminant fix. If you want something more profesional this may not be the best bet.
USE ZIPTIES TO SECURE THE CAMERA.
I have not gone through the effort of designing a connector to fully connect the cam, but I'll work on that eventually.