Dry Box with Rollers - Desiccant Bin - Pattern Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible with original base, only difference is wall slot pattern, and added a few slots to the center.
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
There a quite a few remix options with this bin, and I didn't think to check before making my own - I figured I would add mine to the options.
It is still a bit of a torture test for an FDM printer, but I've printed four of them on my X1C, and haven't had any issues. The design is a lot stronger when attaching/removing the basket from the base.
Print settings are all pretty standard for PLA. 0.4mm nozzle with 0.20mm layer height.
I haven't attempted a print with 0.6mm nozzle yet, so I can't comment on the efficacy, but if anyone wants to give it a shot and report back, that would be cool.
- Note - As shown in the comments, the model isn't well suited for high speed 0.6mm nozzle configurations.
05/21/2025 Update: I've added a ‘ThickWall’ version - same pattern, same fitment, but with slightly thicker outer wall. The original wall thickness is ~1.2mm and I increased it to ~1.8mm. This should help with sturdiness, possible 0.6mm nozzle usage (untested), and the space lost for desiccant is negligible.