Dry Box with Rollers - Desiccant Bin - Pattern Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compatible with original base, only difference is wall slot pattern, and added a few slots to the center.
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 114
- Makes
- 1
- Views
- 490
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
There a quite a few remix options with this bin, and I didn't think to check before making my own - I figured I would add mine to the options.
It is still a bit of a torture test for an FDM printer, but I've printed four of them on my X1C, and haven't had any issues. The design is a lot stronger when attaching/removing the basket from the base.
Print settings are all pretty standard for PLA. 0.4mm nozzle with 0.20mm layer height.
I haven't attempted a print with 0.6mm nozzle yet, so I can't comment on the efficacy, but if anyone wants to give it a shot and report back, that would be cool.
- Note - As shown in the comments, the model isn't well suited for high speed 0.6mm nozzle configurations.
05/21/2025 Update: I've added a ‘ThickWall’ version - same pattern, same fitment, but with slightly thicker outer wall. The original wall thickness is ~1.2mm and I increased it to ~1.8mm. This should help with sturdiness, possible 0.6mm nozzle usage (untested), and the space lost for desiccant is negligible.