Bosh PSM 150 grinder shields
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clear shields to replace original broken ones
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The original grinder shields were broken, so I made a replacement. I tried printing new shields in transparent PETG, but I couldn't get them clear enough, so I bought a clear acrylic plate 4mm and printed frames in black ABS instead.
I included the model for the complete shields in case someone wants to print one as template for cutout of the acrylic plate.
Print instructions
- 0.20mm Structural
- 2 Perimeters on Verical shells
- Print direction as provided in the model
- Filament: ABS (although PLA or PETG should also be fine)
- 100% rectilinear infill
Mounting
Prepare to grind the acrylic a lot until the cutout fit perfectly inside the frames.
Use superglue around all edges of the acrylic to glue it together with the frame.
Use the original bolt to attach the new shields to the grinder.