DaVinci 1.0 Drop in extruder cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I wouldn't recommend using this just yet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
So I wouldn't recommend using this just yet. I'm having issues, it doesn't have enough cooling, and it doesn't exactly "drop in". This is a work in progress. It prints fairly well, I added imbeded supports on everything but the airway into the file befor I sliced it. There is a cut out photo that shows the air channels. If printed with supports it will be very difficult to clear them out. When I get a chance I'll work on it a little more. I have a few more ideas it improve it. Right now I am able to print ABS, no ninja flex yet. It seems to work better than the stock but isn't up to par with what I expected.
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Davinci 1.0
Rafts: Doesn't Matter
Resolution: 0.2mm
Infill: 15%
Post-Printing
I had to do a lot of carving to get this to fit. I need to do an updated drawing but it will fit with a little effort.