Liczymy pasujące modele…
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
A remix of the excellent Leonardo da Vinci perpetual motion wheel concept by RichMac (https://www.thingiverse.com/thing:44185). I remixed it to utilize a common 608z bearing and also some minor other dimensional changes. Enjoy! Print…
Each beam has 2 cut-outs on one side and 1 on the other. Face the side with 1 UP. Took me a few tries to figure out how to put it together. If you insert the crossmembers, you can lift them to insert the next set of beams. Yes you can put…
Leonardo DaVinci cam power hammer This time I went back a bit to history, I like mechanical models and I was interested in this one. It can serve as an illustration of an invention from the past created by one of the greatest inventors -…
Leonardo Da Vinci's flying machine and his fascination with the wind altogether fascinated me too. // So I made his design (with a few intentional alterations) into model that is easy (no support needed, custom brim already incorporated…
About Da Vinci's Catapult: Leonardo da Vinci’s catapult is one of his most fascinating and inventive designs, showcasing his lifelong curiosity about engineering and warfare technology. Unlike traditional catapults that relied on sheer…
This will keep your Speed Editor dust free and protected when sitting on your desktop, or if you want to toss it in a bag for travel. The tall version is a one piece print that's the height of the jog wheel. The thin version is a two…
I wasn't happy with the lack of features available from most carriage designs here designed by other people so I made my own. This carriage keeps the nozzle in the original location enabling you to use the nozzle wiper things that come on…
This duct allows you to mount either a 120mm or 140mm fan into the handle holes on the side of XYZPrinting Da Vinci 1.0/1.0A/2.0/Pro/AIO/etc. printers. This works great for cooling PLA prints during printing, or for expediting the cooling…
*** Please note this is fairly old “project” but could be useful to pick up from, also not anymore maintained so please feel free to “fork it” and call it your own (CC BY-AY) *** How to use Cura 2.3.1 with your daVinci Jr (This is a Mac…
Simple box for daVinci brush soap .
This one, designed by Props3DPro was found on thongiverse under: https://www.thingiverse.com/thing:4825875 I printed it with 0.6mm nozzle in 0.4mm layerheight and 60mm/s. It is printed in petg and fits nice as expected.
Remix of https://www.prusaprinters.org/prints/2561 I wanted to add a little touch of Davinci
Made the original files scaled to 50%, found that I could make improvements at that small of a scale (gears had way too much movement and were slipping above and below each other. Removed the pins from the support with holes in their…
Printed in PETG (PLA should also work); 0.2mm; 0,6mm nozzle Support is needed for the hooks on the rear of the holder.
PLEASE BE ADVISED I HAVE (mostly) ABANDONED MY DAVINCI. Use at your own risk… BUT it should work if printed to size. (Tune shrinkage in your slicer) Some X/Y travel will be lost :( — the price of luxury here… This is an old design I made…
Assembly: red pins are bits of filament, bend the ends to secure them in place (PETG is ideal as other filaments tend to snap) the knob just loosely sits on its shaft, glue it if it bothers you
Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up the height of the inner "rails" so that the Nano…
DO THIS ON YOUR OWN RISK!!! I'm not responsible if you manage to fry your printer, any parts or even your house. Use common sense when wiring and mounting things. Never leave printer going unattended. If you haven't done anything like…
WIP I no longer own this printer so I can't verify it works I did test it slightly but I think a few things were not fully aligned I uploaded all the files I have so that if needed you can just modify them as needed to work.
Originally cut out of acrylic and worked fine, but a little flimsy. Designed to fit even the widest spools I've encountered. Extruded and still flat but beveled to allow spools to rotate freely while printing easily. Haven't had it jam up…
Davinci Resolve Speed Editor stand. You have to print in two copies. The protrusion on the stand is used to block the slide, by fitting it into the hole with the screw. In my opinion, it improves the ergonomics of working on the speed…
This is a stand for the DaVinci IQ dry herb vaporizer. If you're using the vaporizer with the 10 mm adaptor (the mouthpiece with the stem), the stem prevents standing the vaporizer on it's end while you fill it. This stylish little stand…
Spool Holder For DaVinci 1.0 (May work with other models) Recommended Infill Type-Hex/Honey Comb Check Print Settings Below in the Print Settings Area What I Used (Optional) Slicing Program - Slic3r Resolution - 0.3mm Black PLA @ 212C…
Mini model of the XYZ Printing's DaVinci All credit goes to weiho @ xyzprinting Category: 3D Printers
Cover to protect you precious Speed Editor for DaVinci Resolve from Blackmagicdesign. It even has space for a USB Cabel, if you ever have to charge the Speed Editor on the go. To Secure the cover on the device I designed a slot in the…
This is a must-have if you convert your DaVinci 1.0 printer to the e3dv6 and plan to use the original fan header. (make sure the fan is enabled in the repetier configuration) If you're like me and you converted your Davinci to an e3dv6…
A loading tray for six of the STAINLESS STEEL DOSING CAPSULES (.3G) sold by DaVinci.
Mobile Phone Stand / Handy Ständer DaVinciEye Lupe Magnifier Handy Ständer um ein Handy bis zu 13cm über der Oberfläche zu fixieren. Gebraucht wird der Ständer z.B. um die Android App DaVinciEye zu unterstützen oder um das Handy als…
Adapter for the Davinci 1.0a printer. If you want to pull out the crappy 8bit board from the printer and put in a nice BigTreeTech SKR v1.3 32bit board, print this adapter and use the original holes to mount the new nice BTT v1.3 board.…
In the case of flexible filaments, there is the danger that it bends in the gap between the drive pinion and the filament hose, and the filament is no longer conveyed, but is jammed in the printer. The adapter shortens the free space so…
A filament holder for the DaVinci 1.0. These will fit on the build plate, but you will need to rotate them to fit. You will also need an 8.5" length of 1" ID PVC pipe with 1/4" holes spaced 7.5" apart. I included a diagram for reference…
If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…
This is a model of the XYZ DaVinci Jr 3D printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: No Notes: Rotate model 90 degrees on the Y axis to minimize supports Category: 3D Printers
This spool holder is to replace the factory filament spot. New inserts can be printed to fit the opening of you spool. This one is 55mm diameter and fits perfectly on Sainsmart spools. I got tired of fitting my filament. Print…
Ink cartridge adapter for XYZPrinting DaVinci Color Printer. Print in the direction as in the picture with supports on pint bed only and with 100% Infill.
just another fan holder for the davinci pro 1.0. You do not need additional screws to fix the holder. It fits on the existing screws of the printhead. I use a Titan TFD-B6015M12B fan.…
Z axis rod top mount/bearing design to snap in without needing screws. Diameter of hole for lead screw increased, as some found it a bit too tight. Fusion 360 file included so you can make your own changes if desired. Print instructions…
This is a flexible form-fitting case for the DaVinci Miqro. If you like this model please star it and share your make! Print Settings Supports: No Resolution: 0.2 Infill: 10 Filament: Priline TPU Notes: Print at 0.2mm All speeds 20mm/s…
I desinged some dust cabes for the DaVinci Jr. 1.0 Pro. It's printable on a DaVincin Printer. Category: 3D Printer Accessories
DIY heatbed for Jr. ***Yes you can buy silicone heaters and stick them to the bottom of the glass but usually that requires some drilling/cutting into the metal base of the bed to get wires routed through. With this solution you'll only…
Only tested on RAMPS modified Jr but should work on stock firmware as well, just ensure you adjust Z offset. This mount doesn't have place for hotend PCB, you'll need to relocate it if used with stock firmware. Purpose of this design is:…
So I wouldn't recommend using this just yet. I'm having issues, it doesn't have enough cooling, and it doesn't exactly "drop in". This is a work in progress. It prints fairly well, I added imbeded supports on everything but the airway…
After my Jr RAMPS conversion Jr gained SO much but lost one major feature it had - enclosure. So I've made a decision to restore my Jr to its "formal glory" With this mod there's no way going back because you'll need to modify (cut)…
Mounts into the hole on the side of the davinci printer, and mates to a 80mm fan. Part2 mates the other side of the 80mm fan to the flex duct. Sorry it's rotated funny. This was the first part I designed! Uses a 4" duct like this:…
Originally remixed this model for my MK3 to add a Davinci inspired Vitruvian Man. Now added mount for the MK4 X-axis thanks to the work from Jose Cruz on his remix of the original gryoscope found here.…
My daVinci Jr 1.0 has been ‘hacked’. It run's a pi3 with ramps 1.4. One item I really wanted to move away from was the stock hotend. With the quick release being and Issue I'd set about to remix some other design to create this one. It's…
Thickened up the top and added a taper. Category: 3D Printer Accessories
I printed this in ABS .4mm nozzle .2mm layer height 5 top layers 5 bottom layers 5 wall/perimeters 55% infill
Convient spot to have your big glue stick on your DaVinci 1.0 (A)
If you're one of the crazy ones who doesn't use the trackballs and they get in the way, why not replace them with these? (I've moved my whole operation over to DCTLs) These rings still allow to control the Y channel by interfacing with…
Print these to hold your spools neatly outside the case. Designed to allow full opening of the lid with spools loaded. Uses a length of 1/2" metal conduit at least 13.5" long. Simply grabs onto the factory plastic case for a very snug and…
This is a complete upgrade for a davinci 1.0/2.0 hotend. It has dual part cooling fans and a single 4010 heat break fan. You will have to relocate the extruder. On the original firmware it will not have part cooling fan support unless you…
I suggest adding small rubber strips underneath the two connectors for better friction
Before printing V3 fan mount please ensure that you don't have bed leveling probe screw mounts on the right hand side of your print head. If you do then please be aware that fan mount will not sit flush hence those screw mounts ar in the…
Bed adjusting knobs for davinci 2.0 60 deg turn (1 knob) gives 8 point on the calibration numbers. Print Settings Printer: Davinci 2.0A Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 30 % Notes: Made in ABS Category: 3D…
This is a combination of https://www.printables.com/model/238668-da-vinci-pro-side-window-blank-with-hd-locking-tab/files (Thanks FatDan) and https://www.thingiverse.com/thing:4709275 (Thanks ArgusNavus) I have essentially used a DaVinci…
This is just a simple tool holder/hanger used to store a putty knife/scraper, wire brush, and nozzle tip cleaner. On the left side of a DaVinci Pro 3-in-1, there are two small holes that you can attach this part to using M3 screws. These…
Wanted to reclaim the open space in the back of my DaVinci. Came up with this. Spool holder should fit spools up to 95mm wide. I may upload a shorter spool holder for people who don't use wide spools and don't want anything protruding out…
Just an attachment to turn a Davinci Pro printer into a pen plotter. NOTE: This requires bdwalker1's E3D mount and the listed fasteners available here: https://www.thingiverse.com/thing:1328848/files Additionally, this requires 2 M3 nuts…
Remix of... https://www.thingiverse.com/thing:2922204 ...to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up…
Publishing this just in case anybody out there is still using this 10 year old printer and would like to add some 40mm auxiliary part cooling fans. Works for the DaVinci 1.0, DaVinci 1.0A, or DaVinci 1.0 Pro
I wanted a hook to hang my scraper on, so it was easily accessible, so I made this quick hook that clips on to the side of the DaVinci Mini. It's basic, but gets the job done. The little notch is so it will clip on the side & hold it in…
This is just a simple tool holder/hanger used to store a putty knife/scraper, wire brush, and nozzle tip cleaner. On the left side of a DaVinci Pro 3-in-1, there are two small holes that you can attach this part to using M3 screws. These…
I'm currently pretty busy, but I waned to share my WIP. I may add more instructions later, but for those who can see what I'm doing and put the parts in place, here you go. This started by wanting to use,…
Rugged Field Case for DaVinci MIQRO-C Two Versions Available: Full Kit & Essentials Only Keep your DaVinci MIQRO-C and key accessories protected, organized, and ready for adventure. This rugged, compact case is engineered for durability…
I have converted my XYZ Davinchi Pro 1 from bowden to a direct drive using the original carriage, but new controller board. I'm using a BMG extruder with e3dv6 hotend. As I was unable to find any part cooler fan-mount I have designed my…
This is a model of the DaVinci bridge, If you want, try to build it by yourself like a puzzle, if you can't or don't want to, look at my instructable here: https://www.instructables.com/3D-Print-and-Build-a-Da-Vinci-Bridge-for-Your-Desk/…
A latch so my 10 month old can open the door. The hole in model doesn't print well so I drill the hole out with 1/16 drill bit and used a piece of 1.75mm filament as the hinge and melted the end to hold it in place. Category: 3D Printer…
If you use external spool holder and want to swap NFC tags much easier - this might be right solution for you. Also what's the point of keeping that bulky internal spool holder if it's not being used?! I tried to make it as nonintrusive…
Designed for the soap bar to slot with minimal play on any side of the bar, and a lid to cover it up when you're not using it. Printing Tips: This works great with PETG and PLA. The print does not require supports and was designed to…
I'm a DaVinci Resolve user! sign, Crossed out CapCut, because CapCut is Trash :D
Original cable chain mount sliced poorly. Repaired thru Microsoft Tools3D then isolated the bad piece. Also included a modified extruder mount that leaves some more space for the filament tensioner to be reached. Category: 3D Printer Parts
Simple hanger/holder for glue stick and masking tape. It can attach to the right side of the DaVinci Pro 1.0 3-in-1 with M3 screws. This may fit other Davinci printer models. Category: 3D Printer Accessories
Try pierrot93300's part first. It is at https://www.thingiverse.com/thing:4295189 The coupler with my Davinci Pro 1.0 3-in-1 printer must've been larger as it did not fit the orignal thing. I modified his/her original part by ~3mm.…
I made this for camping where flat surfaces rarely exist and the flashlight would roll off the surface easily. Also, I wanted to have a light to velcro on various places depending what I'm doing. The magnetic part was left intact and I…
Install Instructions Easy way: The Github has an installer you can just run and install. Hard way: Just download the master zip and drop the files into your cura install folder NOT THE APPDATA.The most common install location is…
Da vinci not going to the set temp SETTINGS TO CHECK PRINT FOR ELECTRIC FAN BASE PART Category: 3D Printing
NOTICE! This is an import from my older projects on Thingiverse. As such, there may be issues with the models and inconsistencies. My apologies, but I likely will not be revisiting these projects. If you make any necessary adjustments,…
This is a simple cover for travel for the Davinci Resolve Speed Editor keyboard. This design allows you to print it without splitting the model or using support thanks to the screw-on design of the jogwheel cover.
Try pierrot93300's part first. It is at https://www.thingiverse.com/thing:4295189 The coupler with my Davinci Pro 1.0 3-in-1 printer must've been larger as it did not fit the orignal thing. I modified his/her original part by ~3mm.…
I did a quick remix of the original to add a gridfinity base as well as some holes in the lid for ventilation.
Hello, I created this model for HP Robots Otto: Remix Challenge. It is basically a "costume/hat" for the Otto robot. It is modeled after Leonardo DaVinci's tank concept art. I did my best to design a model that is broken down into smaller…
PLEASE CHECK OUT MY NEW DESIGN THIS SETUP TECHNICALLY FITS THE PRINTER BUT DOES A TERRIBLE JOB AT LAYER COOLING. Here is the fan I designed this for.…
Simple hanger/holder for glue stick and masking tape. It can attach to the right side of the DaVinci Pro 1.0 3-in-1 with M3 screws. This may fit other Davinci printer models. Category: 3D Printer Accessories
A SKADIS docking station for the DaVinci Speed Editor. T clips are not designed by me. You can check them out at: https://www.printables.com/model/256896-skadis-t-clip-system/files
I made this change for easier multiplication + I changed the design a bit for a lighter and cleaner print. Category: 3D Printer Parts
Needed a power regulation in order to reduce fan's flow on the nozzle.
Adpater for a DaVinci to mount a ball & socket arm for a webcam. Category: 3D Printer Accessories
Update 2: Angled the nest for the brush by another 10° (20° total) for better cleaning action. I'm no longer sure where I saw the idea for this, but this one is modified for my preferences. It was made to hold part of a wooden, Harbor…
Simple part where wanted to mess around with lofts and in place supports. I chose to print mine as ABS. Supports generally come off pretty easily; just needing a small bit of post processing. Here is the full CAD model:…
I designed this for the davinci micro specifically, so it fits with the open door
This is a layer fan duct that blows from 3 directions for an XYZ DaVinci that's been converted to a Bowden setup. It has the lower X belt run through it. In 2026 no one will need this, but I made it, so here it is.
Hello, I created this model for HP Robots Otto: Remix Challenge. It is basically a "costume/hat" for the Otto robot. It is modeled after Leonardo DaVinci's tank concept art. I did my best to design a model that is broken down into smaller…
If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…
If you're one of the crazy ones who doesn't use the trackballs and they get in the way, why not replace them with these? (I've moved my whole operation over to DCTLs) These rings still allow to control the Y channel by interfacing with…
DaVinci Breach Two experimental breaches, created in a laboratory after a programming error, reveal two hands trying to reach each other across dimensions. A suspended encounter between classical art, science fiction, and a laboratory…
