DaVinci 1.0A - BTT SKR v1.3 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for the Davinci 1.0a printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Adapter for the Davinci 1.0a printer. If you want to pull out the crappy 8bit board from the printer and put in a nice BigTreeTech SKR v1.3 32bit board, print this adapter and use the original holes to mount the new nice BTT v1.3 board.
The SD-card holder and USB will be pointing to the right, towards the original cable slots.
Work in progress.....
Will be adding a 40mm fan holder to cool the step drivers on the card.
Print instructions
Category: 3D Printer Parts Summary
Adapter for the Davinci 1.0a printer. If you want to pull out the crappy 8bit board from the printer and put in a nice BigTreeTech SKR v1.3 32bit board, print this adapter and use the original holes to mount the new nice BTT v1.3 board.
The SD-card holder and USB will be pointing to the right, towards the original cable slots.
Work in progress.....
Will be adding a 40mm fan holder to cool the step drivers on the card.
Print Settings
Printer: Davinci 1.0a
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: ,2
Infill: 20
Filament: Torwells PLA black