Davinci 1.0 Filament Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament holder for the DaVinci 1.0. These will fit on the build plate, but you will need to rotate them to fit. You…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A filament holder for the DaVinci 1.0.
These will fit on the build plate, but you will need to rotate them to fit.
You will also need an 8.5" length of 1" ID PVC pipe with 1/4" holes spaced 7.5" apart. I included a diagram for reference
Make sure to include supports in your slicer. There will be a small support under the pin that goes into the PVC pipe.
You will not be able to have the top cover installed with this mount.
I also used some zip ties to keep the filament roll centered.
Print Settings
Printer:
DaVinci 1.0
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
10-15%
Filament: HatchBox PLA
Category: 3D Printer Parts