Davinci 1.0/1.0A Swivel Mount Toolhead/X Carriage V6 - Air
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carriage for XYZPrinting Davinci 1.0 that adds bltouch and layer cooling with a V6 hotend. (Bowden)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
PLEASE BE ADVISED I HAVE (mostly) ABANDONED MY DAVINCI. Use at your own risk… BUT it should work if printed to size. (Tune shrinkage in your slicer)
Some X/Y travel will be lost :( — the price of luxury here…
This is an old design I made for a friend. I tested the water-cooled version of this design myself with great success. Although I never wanted to print and test this one… maybe someday (still have it but not using at all).
Please see plate for printing orientation or you could just YEET it at your printer with the plate file fits in 180x180 without skirt.
o(o.0)o
and then the m0nkee disappeared…